HM
Loose fit
The female side (guitar cable connection) of these are really loose fit. You'll have to make sure the cable has connection by pulling or applying a pressure on the connecting cable.
2
0
Report
A
Usefull for dj's and musicians
Almost all of my equipment is connected tru jack terminals but i have some that only have rca terminals and it becomes a problem trying to connect everything.
Most of the rca connectors that I have are on dj's specific equipment, I dont know really why, but that seems to be the standard, so this piece of kit comes very handy when I want to think outside the box and, for example, want to connect a cd player to my pedalboard so i can process the signal getting new sounds.
It feels sturdy, light weight, connects the terminals very well, secure them like a boss, it is very well made and it is very useful for many applications.
I didn't experience any signal loss and, when i measured the electrical resistance, I've got very low values so it should be fine for any studio or musician. I didn't measure the frequency response but I'm not expecting to have any problem from a device like this in my applications.
I would recommend the sssnake 1811 Adapter for any studio because for a very low price, even if you don't need it right now, it will be useful somewhere down the road.
Most of the rca connectors that I have are on dj's specific equipment, I dont know really why, but that seems to be the standard, so this piece of kit comes very handy when I want to think outside the box and, for example, want to connect a cd player to my pedalboard so i can process the signal getting new sounds.
It feels sturdy, light weight, connects the terminals very well, secure them like a boss, it is very well made and it is very useful for many applications.
I didn't experience any signal loss and, when i measured the electrical resistance, I've got very low values so it should be fine for any studio or musician. I didn't measure the frequency response but I'm not expecting to have any problem from a device like this in my applications.
I would recommend the sssnake 1811 Adapter for any studio because for a very low price, even if you don't need it right now, it will be useful somewhere down the road.
0
0
Report
S
does the ting,no problems
I'm ok with it, the holes aren't tight for it to hold the jack sometimes but it's doable
0
0
Report
m
bit finicky but works
With some jack cables the contact can not always be made inside the adapter.
With a little wiggling it does.
Not the best build quality, but cheap.
With a little wiggling it does.
Not the best build quality, but cheap.
0
0
Report
A
Great little piece
Perfect adaptor, just what i was looking for, perfectly converts a 1/4 inch jack to RCA, the only thing i would say is that they come a bit loose after a while and potentially the 1/4 inch jack could become disconnected, i would like to see more friction between the adaptor and the 1/4 inch jack lead.
0
0
Report
M
A little loose...
I guess it really depends on the other jacks you're using, but this does feel a little loose and unreliable. Wiggling around a little bit can keep it stable, but probably not reliable for frequent live use.
0
0
Report
MH
Does exactly what I want.
I mean, it's just an adapter but it works it, turned up pretty quickly and it hasn't broken yet.
0
0
Report
JG
Decent quality converters
Bought this to convert my record player to 1/4" jacks and it does the job.
0
0
Report
A
For home use
I bought this for use in live sound applications, however i would not recommend it for any use other than at home, the plastic built feels flimsy and i dont think it would hold up to heavy use, so it has never left my home, i wouldnt take the risk.
On testing, it did not seem in any way to colour my signal or cause any noise.
On testing, it did not seem in any way to colour my signal or cause any noise.
0
0
Report
A
OK
Pretty OK for the price. Could've had better finish.
0
0
Report
