A
Basic 4U rack case.
It's a basic 4U rack case, it has deattachable lids on both sides with standard but kinda small and low quality butterfly latches. One lid has a little bag made out of a net like material where you can throw few things, both lids are moderately deep so you can have an adapter or cables sticking out of panel of your device and still close them, you can screw devices from both sides so you can actually fit more than 4 devices in theory (if they are short enough and if you can somehow manage cable in there and still have some airflow to cool them, but preferably you want 4 devices in front and use other side to mount smaller ones like a wireless receiver and/or power strip) Other than butterfly latches it's build is decent, it could use more comfortable handles (they could be covered in some rubber like material and a little bit wider and longer). Overall - a really affordable and a well made case, if Thomann wants to make a new version I would suggest to add wheels, an retractable handle and improve latches, then it would be perfect :)
1
0
Report
SC
Sturdy for plastic
This 4U rack is very strong for its construction. It has a metal mounting strip on both sides (front and back) so you can mount equipment both sides. This is especially useful for power amps; the heavier ones need supporting at the back so they don't bend the front rack strip.
The handles are a little to close to the body, meaning that it does scratch your hands when lifting it up. I have solved this with a small amount of duct tape and cloth strapped to the handle cut outs, but it would have been nice to see a bigger cut out in the first place.
The butterfly clasps on the front and back panels are interchangeable which is great, although they are a little flimsy. One of the panels even has a small cable pocket on the inside for little extras. This is great because it utilities the otherwise lost space.
If you need a budget transport case, I would strongly recommend this for cheaper hardware, but this will not protect against any knocks, bashed or drops.
The handles are a little to close to the body, meaning that it does scratch your hands when lifting it up. I have solved this with a small amount of duct tape and cloth strapped to the handle cut outs, but it would have been nice to see a bigger cut out in the first place.
The butterfly clasps on the front and back panels are interchangeable which is great, although they are a little flimsy. One of the panels even has a small cable pocket on the inside for little extras. This is great because it utilities the otherwise lost space.
If you need a budget transport case, I would strongly recommend this for cheaper hardware, but this will not protect against any knocks, bashed or drops.
1
0
Report
K
Good for the money
I have had two of these carried to every gig for the past several years (since 2014 and 2016), and only now (end 2019) one of the screws failed and broke off, after more than 150 uses, not always in the best situations. So very good, just a pity that the screw broke off together with some plastic, so I had to replace the rack case -- yet I needed a larger one anyway. Overall very satisfied with these.
0
0
Report
Jo
A great case for gigging and works great in the studio too
I bought this to house an audio interface and a couple of drawers and it has certainly made life easier getting on and off stage. The build quality is great, sturdy and safe for keeping the expensive gear protected inside. Very easy to use and install the various racks inside.
It also works well when not out gigging, sitting beside my desk and holding all XLRs and connecting cables within arms reach.
The case itself is not too heavy, but now that I have loaded it up with interface and drawers it does become quite a hefty load to move around. Consider that when selecting the size, as much bigger than 4U (if you are loading it with gear and cables) might be more cumbersome than it is worth.
It also works well when not out gigging, sitting beside my desk and holding all XLRs and connecting cables within arms reach.
The case itself is not too heavy, but now that I have loaded it up with interface and drawers it does become quite a hefty load to move around. Consider that when selecting the size, as much bigger than 4U (if you are loading it with gear and cables) might be more cumbersome than it is worth.
0
0
Report
K
Lightweight, but not so sturdy case
I bought that case to replace my heavy wooden case that housed my guitar preamp and power amp. It works good for that purpose, and is considerably lighter. It protects the gear well enough on some short distance travel, but I would be hesitant to fly with it, or even post it by courier. The plastic is pretty thin and it seems like it might crack under too much pressure. Otherwise the case looks good and is competently, and price is decent as well. Would recommend only if you are not planning on doing any major touring with it.
0
0
Report
KA
Excellent quality with a few flaws
Very good for its price. 2 flaws I noticed:
1. The rack screw holes are very sensitive and bend easily
2. Could use some more inner space on the sides for cable management.
3. Could have a net pocket on the second cover also.
1. The rack screw holes are very sensitive and bend easily
2. Could use some more inner space on the sides for cable management.
3. Could have a net pocket on the second cover also.
0
0
Report
S
Good basic solution
For such a price, this is an excellent choice, especially as the basic organizer for your 19" equipment. Of course, if you are constantly on the road on tours, perhaps you should take something stronger, but for infrequent trips to gigs and work in the studio/home, it’s perfect.
I use the 4U version of the case where all the slots are equipped (one slot takes up the spacer), and the equipment inside the case is about 30 lbs in weight and the case holds this weight perfectly. It seems that the plastic has excessive flexibility, but I don’t see this as a problem.
I use the 4U version of the case where all the slots are equipped (one slot takes up the spacer), and the equipment inside the case is about 30 lbs in weight and the case holds this weight perfectly. It seems that the plastic has excessive flexibility, but I don’t see this as a problem.
0
0
Report
S
Price / Performance top notch
The Rack Case 4U unit is used to house an combination of a ENGL E530; a Marshall 8008 power amp and a Marshall 9001 pre-amp. It all fits perfectly and the case is stable. Feels sturdy and just like any regular rack case. The locks are fine. Basic butterfly latch type. Nothing really out of the ordinary. For the price simply top notch.
0
0
Report
C
Good overall quality compared to the Gator and SKB case
0
0
Report
L
Overall good product
Good product , recommended ! It won't handle a serious road trip , but for light use e.g. getting to the gig and back it's more than enough !
0
0
Report
