Velcro Hook Tape 20mm

681

Velcro Grommet

  • Self-adhesive
  • Width: 20 mm
  • Roll with 5 m
  • Colour: Black
  • Velcro fastener webbing tape is also required (216583)
K dostání od Srpen 2008
Číslo produktu 216582
Prodejní jednotka 1 ks
Component type Hook And Loop Fastener
Type Velcro
Container Size 5
Packaging unit M
Zobrazit víc
555 Kč
111 Kč / m •
Cena vč. DPH nezahrnuje poštovné 295 Kč
Množstevní sleva
Cena za kus Ušetříte Množství
555 Kč 1
529 Kč 4,7% 3
499 Kč 10,1% 5
Na skladě
Na skladě

Tento produkt je na skladě a může být obratem odeslán.

Informace o expedici
Dodání přibližně v rozmezí Středa, 24.04.Čtvrtek, 25.04.
1

681 Hodnocení zákazníků

4.7 / 5

Musíte být přihlášeni, pokud chcete hodnotit produkty.

Upozornění: Abychom zabránili tomu, že se budou hodnocení zakládat informacích z doslechu, polovičních pravdách nebo skryté reklamě, dovolujeme na našich stránkách hodnotit pouze skutečným uživatelům, kteří u nás vybavení také koupili.

Po přihlášení najdete také v zákaznickém centru v sekci "Hodnotit produkty" všechny produkty, které můžete hodnotit.

Zpracování

231 Recenze

google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
OS
Vaut le prix
Oncle Sim 15.05.2021
Ces bandes collent très bien aux surfaces sur lesquelles on les applique, pour peu qu'on chasse bien les bulles d'air et qu'on attend 10-20min avant d'acrrocher quoi que ce soit dessus. Parfait pour installer des appareils non-rackables dans des racks qu'on transporte.
Zpracování
0
0
Ohlásit hodnocení

Ohlásit hodnocení

google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
P
Velcro. The pedal fan's friend
Paul8331 19.02.2014
Getting good velcro for use on pedal boards is difficult. The velcro that can be bought in most shops is not strong enough for attaching pedals to a floorboard that will get stamped on every day. I use a Pedal Train board with about 8 pedals on it. Some of them are quite heavy and I want them to stay where I put them. This velcro does that. It is a good width and it's easy to cut and apply to pedals either in a single strip or 2 strips if the pedal is big enough to need it. As with all velcro though, there is a slight issue - it doesn't stay stuck to pedals with heavy rubber bases, like the usual bottom of a Boss pedal (and many others). The glue doesn't stick to the rubber properly. So this is excellent on metal or plastic, but not as good on rubber bottom pedals. Perhaps one day someone will make a velcro that will stick properly to the rubber as well. We can hope!
Zpracování
0
1
Ohlásit hodnocení

Ohlásit hodnocení

google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
M
It goes a long way!
MatthewG 29.01.2014
A little of this tape goes a long way so far half a real has done several iterations of my board and my dads boards and is still going!
it sticks well to most pedals, as well as any other tape on the market and fixes securely to velcro in fact i had trouble removing my morely wah from the board it was so well stuck down!
the glue that holds the rubber on the back of a pedal will go before this stuff does so it has maximum points for durability infact the only problems that are to be had with this tape are that it will not stick to some pedals (Mooer) but this is easily solved by removing the base of the pedal and replacing it inside out and sticking it down that way.

As good as any other velcro tape on the market without the mark up, so why would you buy any other?
Zpracování
0
0
Ohlásit hodnocení

Ohlásit hodnocení

google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
s
Essential
swlover 23.09.2019
I was able to conceive, design and set up a quite complex rack-mounted electronic music system around a semi-modular synthesizer thanks to Velcro. This is the original one, with definitely better sticking material, so don't waste your money elsewhere.
Zpracování
0
0
Ohlásit hodnocení

Ohlásit hodnocení