Millenium Rackstand 6U

150

Rack Stand 6 U

  • Thread for M5 screws
  • Dimensions (W x H x D): 48 x 29.5 x 35.5 cm
  • Including 12 screws
  • Colour: Black
Fås siden September 2018
Artikelnummer 442737
salgsenhed 1 stk
usable height in U 6 U
Material Steel
Wheels No
Type Tabletop Stand
Height min. 295 mm
Special Design No
Height max. 295 mm
Weight 1,8 kg
Vis mere
96 kr
Inkl. moms. Obs! Yderligere fragtomkostninger 60 kr
på lager
på lager

Produktet er på lager og klar til afsendelse.

Information om forsendelse
Forventet levering mellem fredag, 26.04. og mandag, 29.04.
1

150 Kundebedømmelser

4 / 5

Du skal være logget på, for at kunne vurdere et produkt.

BemærkVi tillader kun vores kunder, at afgive en vurdering af det udstyr de har købt hos os. Vi modtager ikke anmeldelser eller vurderinger af produkter fra tredje kilde.

Efter login finder du også i kundencenter under "vurderinger af produkt" alle artikler, som du kan afgive en vurdering af.

stabilitet

forarbejdning

105 Anmeldelser

K
Total design failure - you can at most use it as a 5U stand
Klok' 11.01.2024
The stabilising bar across the top blocks the use of the top unit!

That bar is a bit too short too. The two sides of the stand tilts a bit inward due to this, so they are not parallel to the edges of the equipment. It does not look good.

You can use the lowest unit space if you have something only 12 cm deep (including whatever cables sticks out the back of the unit). On the third unit space counting from the bottom, I have a 29 cm deep unit that stops only 2.5 cm above the table. So already there, you may have to use angled plugs for your equipment if you have something this "deep".

If you consider it a 4U stand for short items and a maybe use a blanking plate in the top spot to hide the stupidness of the top bar placement, you may be fine.
forarbejdning
stabilitet
0
0
Anmeld bedømmelse

Anmeld bedømmelse

CK
Sjovt produkt.
Claus Kaasgaard 28.02.2021
Men fradrag i løn til den der foreslog M5 skruer. Ellers fin.
forarbejdning
stabilitet
0
0
Anmeld bedømmelse

Anmeld bedømmelse

google translate gb
Der opstod en fejl. Prøv igen senere.
L
Feels almos like a scam
Liukke 07.02.2022
I feel very bad giving a harsh review on a Thomann owned brand but...this rack is awful.
First things first...it comes with half of needed screws, only 12, despite saying just "Includes screws" in the description.

If you check carefully one of the photos it shows the "only" 12 screws, it feels like one of those cheap scams because another package of M5 screws costs 3.90€ and of course you end up with MORE than needed.

So if you plan to put serious equipment on that rack (which requires all 4 screws per module) then either buy something else of consider the extra cost.
I thought I was in Germany where things are usually fair but looks like I ended up in a classic American scam...my bad.

Second huge problem, the quality just sucks.
Feels like they coated the paint without caring for the screw threads, which simply don't work.
My whole right side of the rack was a pain in the butt to fix, the screws simply didn't fit in, I had to manually tap the holes with a sharper and specific screw so that it fits...in the meantime I ended up with stripped screws while trying to use the freaking product as intended.

Damn, after almost a decade of doing purchases on Thomann this is the first time I feel embarrassed for them, how can they sell this :/
forarbejdning
stabilitet
3
3
Anmeld bedømmelse

Anmeld bedømmelse

google translate gb
Der opstod en fejl. Prøv igen senere.
EK
Works fine, but bring your own screws
Emlyn K Helicopter 07.01.2023
Pros (with caveats):

Construction is solid - heavy duty 3.5mm steel nicely finished with rugged black powder-coating (but see * below). This thing will house a hefty unit on it's top row and not wobble.

30 degree angle great for desktop use (but see ** below).

Cons (with work-arounds):

*As noted in other reviews, the screw-holes must be tapped before use. I used one of the supplied screws to carefully go in and out of each hole - no problems after that. The supplied screws are useless - too soft and WAY too short. On my range of rack gear the thickness of the rack ears goes from 2mm to 6mm, so on even the middle-thickness units the screw only goes into the thread half-way. Thats a recipe for breaking things! Luckily for me I had a bag of spare (longer, harder) screws. For the sake of a couple more Euros they really should give you decent screws, and 24 of them!

**Note that the lowest two or three slots are restricted due to the 30 degree rack - it's not possible to mount anything longer than 12cm on the 2nd row without hitting the legs. But its fine for mounting shallower units - I've put a Behringer Model D (with rack ears) at the bottom and it fits just fine - plus spare room underneath to slide in an old RX-17 drum machine.

Also note that the thin top crossbar obscures the top-most slot. But that isn't a problem if you've already put one or two units in lower down - those plus the main bottom crossbar are all thats needed to make the rack sturdy.

Despite the cons, I'm ordering another one of these (12u this time) as its solid, the angle is just right and its SO cheap!
forarbejdning
stabilitet
0
0
Anmeld bedømmelse

Anmeld bedømmelse