I
Not for flute
With good intentions, but not fit for purpose.
Pros:
None
Cons:
Handling noise
Expensive
Velcro supplied better replaced with a velcro cable-tie
Doesn't fit flute well
Velcro is far too long for flute and not "sticky" the whole length - so requires fitting skewed with a tail sticking out to ensure the rubber bit of the mount sits against the body of the flute (or else the whole mount just slides round).
I tried with a velcro cable-tie and this worked better (velcro both sides the whole length)
The show stopper however is the amount of handling and key noise when you're actually trying to use it.
Also....nearly £17 for a small rubber mount and a bit of velcro is really poor value.
Pros:
None
Cons:
Handling noise
Expensive
Velcro supplied better replaced with a velcro cable-tie
Doesn't fit flute well
Velcro is far too long for flute and not "sticky" the whole length - so requires fitting skewed with a tail sticking out to ensure the rubber bit of the mount sits against the body of the flute (or else the whole mount just slides round).
I tried with a velcro cable-tie and this worked better (velcro both sides the whole length)
The show stopper however is the amount of handling and key noise when you're actually trying to use it.
Also....nearly £17 for a small rubber mount and a bit of velcro is really poor value.
2
0
Anmeld bedømmelse
C
Half the price of the DPA clip....unfortuately half the job.
In principle this clip is a great asset to the Ovid system. Alas its design has one basic flaw - the ability to get a really nice grip on the instrument - and the faff in getting it on and getting it to stay in place.
The basic flaw is in the design of the velcro fastening. The DPA clip has the velcro fixed at one end. The velcro comes through the clip and thus through a simple pull a very tight fit and secure fit can be achieved. I found that this clip was awkward (in so far as you need 2 hands holding bits of velcro in order to try to get the tension required - it just isnt as good - and in this case I have to say that despite its price you'll regret buying this - just get the DPA clip and enjoy life. You dont need to be cursing your equipment.
The basic flaw is in the design of the velcro fastening. The DPA clip has the velcro fixed at one end. The velcro comes through the clip and thus through a simple pull a very tight fit and secure fit can be achieved. I found that this clip was awkward (in so far as you need 2 hands holding bits of velcro in order to try to get the tension required - it just isnt as good - and in this case I have to say that despite its price you'll regret buying this - just get the DPA clip and enjoy life. You dont need to be cursing your equipment.
0
0
Anmeld bedømmelse
A
Does not really work in practice
I bought this to amplify my flute live, using it to mount the t.bone CC100 microphone
Pros - none
Cons - lots...
It does not really work in practice.
The fixing tape is too long for a flute; I had to cut it.
The clip does not stay in place as it is too smooth - it just rotates round the body of the flute.
Wherever you install it the microphone and cable get in the way of the mouth piece.
The clip does not have any shock isolation, it picks up so much key noise from the flute which is clearly audible above the notes.
Very bad design.
Pros - none
Cons - lots...
It does not really work in practice.
The fixing tape is too long for a flute; I had to cut it.
The clip does not stay in place as it is too smooth - it just rotates round the body of the flute.
Wherever you install it the microphone and cable get in the way of the mouth piece.
The clip does not have any shock isolation, it picks up so much key noise from the flute which is clearly audible above the notes.
Very bad design.
0
0
Anmeld bedømmelse
r
Nice option.
I just bought the Ovid goose neck mic and fitting options just in case some extra horns or winds turn up. Nice to have options to fit a bug to any wind instrument ... works OK on a flute and the Ovid is actually quite light as opposed to other bugs I use ... I don't think a flautist or a clarinetist would want anything too heavy hanging off their end bits!!
0
0
Anmeld bedømmelse
Fp
Moves too much
It holds the mic well, but it continually shifts on the flute and the Velcro is too short for how long the strap is. Most of the strap is hanging off of my flute
0
0
Anmeld bedømmelse
BW
Also works for blockflute, various other circumstances
This is a handy clip even if you?re not a flute player. I?ve successfully used this to clip the mic to a blockflute (recorder) and in various other circumstances where I needed to hold the mic onto something round which was too big for the general purpose spring clip.
0
0
Anmeld bedømmelse
f
clip too long for flute, doesn't hold properly and no shock absorption, pretty much useless!
0
0
Anmeld bedømmelse
J
Does what it says on the tin
Is ok but strap could be a bit longer with more "connective" surface. Works but "only just" on some clarinets.
0
0
Anmeld bedømmelse
M
Well made, sturdy, does the job
Well made, sturdy and easy to use, doesn't mark the instrument and can be adjusted to the least obtrusive place for the musician. Fits DPA 4099 too, which can be useful.
0
0
Anmeld bedømmelse
C
A good start
Having only just received this item its too early to say just how good it is. so far it has been used on a flute to good effect. The Ovid system would benefit from some comprehensive instructions on how to attach these clips to various instruments and how best to place the microphone.
0
0
Anmeld bedømmelse
