Rockboard PatchWorks Patch Cable GD

11

Sistema de cable de conexión sin soldadura

  • Set para el ensamblado de 5 cables de conexión
  • Diseño único de conector bidireccional de 2 piezas (pendiente de patente)
  • Se pueden ensamblar como conectores rectos o en ángulo
  • Diseño plug 'n play - no requiere pelado de cables
  • Incluye 10 conectores y 3 m de cable
  • Dimensiones de los conectores rectos (largo x ancho x alto): 20 x 12 x 10 mm (13/16" x 1/2" x 3/8")
  • Dimensiones de los conectores en ángulo (largo x ancho x alto): 15 x 13 x 10 mm (9/16" x 1/2" x 3/8")
  • Contactos chapados en oro
  • Acabado dorado
  • Cable de baja capacitancia para una máxima transparencia de la señal
  • Conductor de cobre libre de oxígeno flexible de 7 / 0,16 mm
  • Aislamiento rígido de PE
  • Blindaje de cobre estañado trenzado de 6 x 16 / 0,12 mm
  • Cubierta exterior de PVC en negro
  • Capacitancia del conductor / blindaje inferior a 8 pF / decímetro
  • Resistencia del conductor inferior a 4 mOhmios / decímetro
  • Temperatura de funcionamiento: -15ºC a +70ºC / 5ºF a 158ºF
  • Diámetro: 4 mm (3/16")
  • Incluye llave TX8, cortador de cables y 10 tornillos de repuesto
Disponible desde Agosto 2018
número de artículo 444375
Precio por 1 Unidad(es)
Color Negro
Desde conector Jack 6.3 mm TS macho
A conector Jack 6.3 mm TS macho en ángulo
45 €
IVA incluido. 15 € de gastos de envío adicionales
En stock
En stock

Este producto está en stock y puede ser enviado inmediatamente.

Información sobre envíos
Previsión de envío el Sábado, 30.03.
1

11 Valoraciones de los clientes

4.3 / 5

Para poder evaluar un producto deber estar registrado en su centro de clientes.

Importante: Con fin de evitar evaluaciones en base a rumores o mitos populares, solo permitimos en nuestro website evaluaciones por clientes que hayan comprado el producto con nosotros.

Tras de acceder a su centro de clientes encuentra en Centro de clientes "Evaluar productos" todos los artículos que puede evaluar.

Fabricación

8 Reseñas

google translate gb
Lamentablemente hubo un error. Por favor, inténtelo de nuevo más tarde.
J
Great product! But...
Jay-Æ 13.02.2019
Bought these to get rid of all excess cables on my pedalboard after browsing the net for valuable options. Pack comes with 3m of high-end cable and 10 plugs (which can be configured as straight or angled)
The "manual" is just a small leaflet with some pictures on and a "how-to" . After trying the first one i immediately noticed that this isn't as easy as most people may think. A couple of videos on the net show people assembling a complete pedalboard in high speed, but i have serious doubts that these work right off. It's a very thin line between making a perfect working cable, or ruining it by tightening the screw too much. I tested every cable with a multimeter before putting it in place on the board, and out of the 5 cables I made, I had three that I had to re-cut and shorten 2 cm because by tightening the screw I had accidentally pierced the cable. So be very careful! Don't tighten the screw as much as you'd think is necessary, but hold back a turn or two!
As for the quality : absolutely no complaints there! Right off,I noticed a huge difference in sound with the new rockboard cables. I always used the EBS patch-cables (with the flat heads to win some space on my board) and thought they worked fine, until I put these new ones on. Huge improvement!
Just another little thing to think about : you get 3m of cable and 10 plugs, which gives you the means to make 5 cables of 60 cm length. First off, this is a strange number of cables you can make... Most of the time you'll need a "send" and a "return" for each effect you use, so you'll need an even number of cables. So IMO this is far too much cable or too less plugs. You're not buying (this quite expensive) set this to make 60 cm cables on your pedalboard ? I used al ten plugs and was left with 1.8 m of cable. So it would be nice if they'd for starters added just 2 plugs so you can have 3 sets of send/return pairs.

So to wrap up:
Pro : - Sound quality and high-end state of the cables/plugs
Con : - Sensitive assembly and an uneven number of cables you end up with.
Fabricación
4
0
Reportar evaluación

Reportar evaluación

google translate de
Lamentablemente hubo un error. Por favor, inténtelo de nuevo más tarde.
HH
Geht so leider nicht
Henning Hasselbach 30.09.2020
In der Hoffnung, eine elegante Lösung für sehr unterschiedliche Kabellängen auf meinem Pedalboard zu finden, habe ich dieses Set ausprobiert.
Leider hatte ich beim Zusammensetzen (strikt nach Anweisung) einen Ausschuss von knapp 75% – also Kabel wieder kürzen, Schräubchen wieder rein und erneut per Kabeltester checken.
Es blieb leider dabei: nur jeder vierte Versuch glückte und ich konnte dann ein funktionierendes Kabel in der Hand halten.
Schade – tolle Idee, leider nur in der Theorie.
Fabricación
2
0
Reportar evaluación

Reportar evaluación

google translate de
Lamentablemente hubo un error. Por favor, inténtelo de nuevo más tarde.
i
absolute Empfehlung
iralda 27.03.2019
Es ist wirklich so einfach, wie beschrieben. Bitte unbedingt beachten, dass die Schrube nicht zu fest angezogen werden darf, dann kann nichts schiefgehen. Konnte nix Negatives finden - Moment, evt. macht ein Meter Kabel mehr noch einen Punkt zusätzlich.
Fabricación
0
0
Reportar evaluación

Reportar evaluación