Thon Rack Case 12U 12 RA

107

Maleta Rack de 19"

  • Ideal para mesas de mezclas de 19" entre otros dispositivos
  • Profundidad interna de 12 cm a partir de los rieles de fijación
  • Altura usable: 12U
  • Material: Contrachapado de 7 mm
  • Cantos de aluminio de 22 x 22 mm
  • Tapa extraíble
  • 2 cierres de resorte
  • Pies de goma
  • Esquinas de bola de acero pequeñas
  • 1 asa de maleta
  • Con sistema de rieles extraíbles (ángulo de orientación 24°)
  • Incluye material de fijación
  • Medidas: 55 x 19,5 x 57,5 cm
  • Peso: 7,7 kg
  • Color: Marrón fenol
  • Fabricado en Alemania
Disponible desde Febrero 2003
número de artículo 159998
Precio por 1 Unidad(es)
Unidades de rack 12 U
Color Marrón
Profundidad maxima de instalacion (mm) 120 mm
Cierre 2x snap
Peso (kg) 7,7 kg
Manijas retractiles 1
Manijas fijas 0
Equipamiento especial Rail de rack ajustable
Mostrar más
131 €
Sin gastos de envío e incluyendo IVA.
En stock
En stock

Este producto está en stock y puede ser enviado inmediatamente.

Información sobre envíos
Previsión de envío el Sábado, 30.03.
1

107 Valoraciones de los clientes

4.6 / 5

Para poder evaluar un producto deber estar registrado en su centro de clientes.

Importante: Con fin de evitar evaluaciones en base a rumores o mitos populares, solo permitimos en nuestro website evaluaciones por clientes que hayan comprado el producto con nosotros.

Tras de acceder a su centro de clientes encuentra en Centro de clientes "Evaluar productos" todos los artículos que puede evaluar.

Estabilidad

Manipulación

Fabricación

48 Reseñas

A
Flight Case funcional y barato
Anónimo 29.12.2015
Buen Flight Case, funcional y barato. Se puede llevar a conciertos aunque no lo recomendaría en caso de giras muy largas o viajes muy grandes.
Lo uso para mi nueva Focusrite 8pre y no podría estar más contento con mi compra. Recomendado!
Estabilidad
Manipulación
Fabricación
0
0
Reportar evaluación

Reportar evaluación

google translate gb
Lamentablemente hubo un error. Por favor, inténtelo de nuevo más tarde.
K
Good Case, good value, good functionality.
Kevo 08.05.2019
I purchased this along with and to house the Yamaha MG12XU Analogue Mixing desk. First of all, 10 out of 10 again to Thomann on quality packaging and shipping. Everything arrived in perfect condition and I had no issues. It did arrive a couple of days later than expected, but we had a Bank Holiday weekend here in Ireland. So fair enough.
I work mainly as a solo performer with Vocal & Acoustic Guitar. I wanted the ability to raise the desk at an angle so I can monitor what is happening easily while performing. Thomann do have a purpose built case for this desk but it does not have the rack mountability or the ability to raise the desk to an angle.

The quality of the build is good. With 7mm Birch, 4 rubber feet and ball corners. I have 2 minor issues. The first is the raising part of the case is very stiff and required a bit of effort to raise into place. The second are the clasps for holding the lid in place. I can tell over time they will stretch and become less effective.

My overall opinion is a good case at a good price point for my needs. I have owned a few Thon cases now and never had an issue with any of them. You can pick fault with anything at lower price points if you try hard enough. I am trying to be honest to help other buyers. I would recommend this case and would purchase again if the need arose.
Estabilidad
Manipulación
Fabricación
0
0
Reportar evaluación

Reportar evaluación

google translate gb
Lamentablemente hubo un error. Por favor, inténtelo de nuevo más tarde.
M
Good build quality but rail system is severely flawed
Matt.p 20.02.2022
Overall the case is well built and has a sturdy feeling to it. Unfortunately, the reason I purchased this case was specifically to have a compact case with the ability to use mounted equipment on a slight angle, and there are multiple issues with the mounting rails:

1. There are no included handles to raise or lower the bars, meaning if you use all 12 units in the case then you'll have to improvise a solution (e. g. using string) or jam your fingers down the sides of the rails to grab hold and pull (with great difficulty!) the rails slowly upwards;

2. The rails aren't bound to each other, meaning you can raise one rail independent of the other. Doing so risks bending rack ears on mounted gear.

3. The resistance of the rails when raised is not nearly enough. I use the case to house a modular synthesiser and when patching (banana) cables into modules the rails move several centimetres towards their original position. Ratcheted rails would have been a much better choice in this regard.
Estabilidad
Manipulación
Fabricación
1
0
Reportar evaluación

Reportar evaluación

google translate gb
Lamentablemente hubo un error. Por favor, inténtelo de nuevo más tarde.
G
Rack case 12u 12
Gerald8808 17.05.2015
Excellent strong case for a mixing desk
Estabilidad
Manipulación
Fabricación
0
0
Reportar evaluación

Reportar evaluación