Thon Case 8x LED PAR64 Short

120

Flightcase para equipo de luces

  • Realizado a medida para 8x Stairville LED PAR 64 short
  • Panel de contrachapado de 7mm
  • Cantos de aluminio de 25 x 25 mm
  • Mínimo 1 cm de acolchado de gomaespuma y 3 cm en la tapa
  • 2 cierres de mariposa con muelle medium
  • 4 asas encastradas
  • 8 compartimentos de 277 x 277 x 397 mm cada uno
  • 4 esquinas de bola de acero arriba
  • 4 esquinas de bola de acero con función de apilado debajo
  • Medida exterior (An x Pr x Al): Aprox. 1180 x 603 x 467 mm
  • Peso: Aprox. 23,0 kg
  • Fabricado en Alemania
Disponible desde Diciembre 2009
número de artículo 239943
Precio por 1 Unidad(es)
Número de dispositivos 8
Tamaño de los separadores Compartimento acolchado
Ruedas No
Cierre 2x mariposa
253 €
Sin gastos de envío e incluyendo IVA.
En stock
En stock

Este producto está en stock y puede ser enviado inmediatamente.

Información sobre envíos
Previsión de envío el Martes, 2.04.
1

120 Valoraciones de los clientes

4.5 / 5

Para poder evaluar un producto deber estar registrado en su centro de clientes.

Importante: Con fin de evitar evaluaciones en base a rumores o mitos populares, solo permitimos en nuestro website evaluaciones por clientes que hayan comprado el producto con nosotros.

Tras de acceder a su centro de clientes encuentra en Centro de clientes "Evaluar productos" todos los artículos que puede evaluar.

Estabilidad

Manipulación

Fabricación

43 Reseñas

I
Ivan9129 27.10.2020
NO ES FACIL SU TRASLADO SI VA CARGADO
Estabilidad
Manipulación
Fabricación
0
0
Reportar evaluación

Reportar evaluación

google translate gb
Lamentablemente hubo un error. Por favor, inténtelo de nuevo más tarde.
S
Thon Case 8x LED PAR64 Short
StephenF 26.12.2014
I have been looking for a case to transport long Par 56 cans and Par64 LED's for some time. All the cases I have looked at are just a touch to small for the large Par 56 can's. I decided to try this case from Thomann, it looked as if it may just be large enough to take the cans, which it does with ease.
The inside base of the case is lined with a protective foam, so the cans can sit nicely protected and stable. The devisions make sure all 8 of the cans do not fall over in transport and get damaged.
Quality of the build is good, if a little flimsy. I noted that the dividers may need to have small brackets added to stiffen up the top sections. The 7mm plywood has a laminated brown finish which looks as if it will stand up to a little abuse.
Overall Thormann has come up with a good compromise between build quality and finished weight. Using a thicker plywood would have made the case much stiffer but added a lot of weight.
As this is a fairly big case I was surprised that I could lift it (all be it empty) out of it's packing box. When loaded with the lights it is still manageable, and the handles make it easy to move around and load. I decided not to fit wheels, as these would make stacking the case much harder, instead I use a trolly board if I need to move the case over long distances.
All the fittings are nicely cut into the plywood and all the rivets finished off well. I liked the way the quality ball corners will help the case stack in storage.
I have already decided to buy more of these cases to protect and transport my other sound and lighting gear.
Estabilidad
Manipulación
Fabricación
1
0
Reportar evaluación

Reportar evaluación

google translate gb
Lamentablemente hubo un error. Por favor, inténtelo de nuevo más tarde.
G
Basic enough but does the job
Gerry5992 01.01.2019
First thing i would say is buy 4 castors (wheels) for this or you will die lifting it.
I have about 10 of these all at least 3 years old and all still ok.
It?s a cheap case for the money but it?s all down to how you handle it.
All of mine are still in perfect order. I use them for cans and also my arri lights fit in with a g clamp on so that?s a bonus
Estabilidad
Manipulación
Fabricación
0
0
Reportar evaluación

Reportar evaluación

google translate gb
Lamentablemente hubo un error. Por favor, inténtelo de nuevo más tarde.
A
A product that is great, but room for improvement.
Anónimo 14.10.2016
I have two of these cases which i use to store LED cans. In one I can fit 8x Par64 LED cans + short DMX and power cables, in the other i use it to hold 24x Cameo 7x9w Flat LED par cans + 24 wooden floor stands/bases.

A bit too bulky and heavy (once filled) to capacity (or beyond) - wish it had wheels. Case is also liable to twisting and torsion. As such bigger butterfly catches could have been fitted.

The plus side is that they have been touring now for 2+ years with no damage to the case or significant corrosion to metalwork.

The case is very spacey!
Estabilidad
Manipulación
Fabricación
0
0
Reportar evaluación

Reportar evaluación