Behringer 962 Sequential Switch

35

Eurorack Module

  • Analogue CV multiplexer / switch
  • 3 Trigger inputs and outputs
  • 3 Buttons for manual channel selection
  • CV Input for switching channels
  • 2 Parallel V trigger outputs
  • Width: 8 HP
Myynnissä vuodesta Toukokuu 2020
Tuotenumero 486900
Myyntierä 1 kappaletta
Width 8 TE / HP
57 €
Sis. ALV. Ei sisällä 12 € rahtikulua
Saatavilla 8-10 viikon sisällä
Saatavilla 8-10 viikon sisällä

Tuotetta saatavilla pian varastoon ja lähetykseen.

Tietoa lähetyksestä
1

35 Asiakkaiden arviot

4.9 / 5

Sinun pitää kirjatua sisään, jotta voit arvostella tuotteita.

Huomio: jotta vältymme kuulopuheisiin, epätäydelliseen tietoon tai mainontaan perustuvia arvosteluja, niitä saa tehdä vain asiakas, joka on tuotteen meiltä ostanut.

Sisäänkirjautumisen jälkeen löydät kaikki arvosteltavat tuotteet kohdasta “Arvostele tuotteita” asiakastililtäsi.

Käyttö

Ominaisuudet

Työnjälki

18 Arvostelut

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
J
Extend the 960 sequencer to 16 or 24 steps
John5372 10.12.2020
This is a v-trig driven 2 or 3 way switch. The 2/3 step selection is determined by patching an output from the 3rd step.
I use a pair of these to extend the 960 sequencers but it has other applications. It switches control voltages so can be used for switching between modulation sources like ADSRs. I have these in a large rig based on the Moog IIIp. I had the original Moog back in the day and these little eurorack clones work the same, are well built, smaller and cheaper. As it is driven by the rising edge of a v-trig you could use it with other systems. It works well with my Doepfer rig too. If you have a 960 sequencer you definitely need one of these.
Käyttö
Ominaisuudet
Työnjälki
3
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
s
Excellent module!
shlomi 29.01.2021
I recommend it for use in any Eurorac case. It is very useful. I use it mainly to change or replace a subject (instead of lowering or raising the volume in the mixer for example).
I recommend it for use in any Eurorac case. It is very useful. I use it mainly to change or replace a subject (instead of lowering or raising the volume in the mixer for example).
The price is very reasonable, it is highly recommended to buy more than one.
Käyttö
Ominaisuudet
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
N
Must Have module for sure!
N.F 02.11.2022
the 962 Expands greatly on the capabilities of the 960 sequencer and is a great tool for routing and switching between signals to achieve complex modulation
Käyttö
Ominaisuudet
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
J
Perfect pair for 960
Jardmonkey 05.03.2021
962 was made for the 960 sequencer, and it works perfectly. Build quality is like a tank, and the price is unbeatable! There are no cons for this purpose built module that does exactly what it is supposed to do.
Käyttö
Ominaisuudet
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta