M
Good, but overpriced
They're being used on a guitar I repaired, that the owner had lost them (as well as done other parts).
I bought these because the client wanted. Otherwise I would've bought either cheaper ones from Thomann, or I would've gone to a local store and would've bought cheaper ones anyway, that, from my experience, do the same job, with quality, for way less money.
Butt they're good, and if you're looking for genuine parts only... This is it.
I bought these because the client wanted. Otherwise I would've bought either cheaper ones from Thomann, or I would've gone to a local store and would've bought cheaper ones anyway, that, from my experience, do the same job, with quality, for way less money.
Butt they're good, and if you're looking for genuine parts only... This is it.
2
0
Raportoi ongelmasta
MS
Solid, Well made, perfectly fitting
By experience I can say that these screws will give no problems. They resist multiple screwing/unscrewing cycles and they fit perfectly.
Quality is perfect, as much as spacing. Highly recommended
Quality is perfect, as much as spacing. Highly recommended
1
0
Raportoi ongelmasta
T
Poor quality metal
I got these to replace the worn screws on one of my older Fenders. This bass has the truss rod adjustment at the neck heel so the neck needs to be removed for adjustments.
The metal in these screws are surprisingly poor quality for an original Fender product. It's more like the soft metal used in cheap Far Eastern products. Which I suspect is exactly what this is. The heads started stripping the first time I tightened them. After being tightened just once they're practically as bad as the old ones I wanted to replace. At least the old ones are made of harder metal so I put them back instead.
Very poor. Avoid.
The metal in these screws are surprisingly poor quality for an original Fender product. It's more like the soft metal used in cheap Far Eastern products. Which I suspect is exactly what this is. The heads started stripping the first time I tightened them. After being tightened just once they're practically as bad as the old ones I wanted to replace. At least the old ones are made of harder metal so I put them back instead.
Very poor. Avoid.
0
0
Raportoi ongelmasta
s
for lazy people
I'm sure you can find equally good screws in any diy store for way cheaper price per screw, but you often need to buy in bulk, and you need to look for the right size. For lazy people like me, this is just fine, albeit a tad overpriced. The metal quality is very good, you won't screw them up.
0
0
Raportoi ongelmasta
K
Great neck screws.
All around great neck screws. The hats look nice and shiny, much better than no-name brands you may decide to opt out for.
Good screws matter and should not be overlooked.
Good screws matter and should not be overlooked.
0
0
Raportoi ongelmasta
j
They're screws!
I was pleased to see such high quality screws, they fit perfectly and using a high-quality screwdriver I managed to drive them in securely and properly. The thread profile is perfect and the head is ground impeccably. 10/10 exquisite screws
0
0
Raportoi ongelmasta
A
Product as expected
No issues here. Product appears to be as advertised. Will mount on next project. Further commentary will be added if warranted.
1
1
Raportoi ongelmasta
G
they do the trick
They fulfill their purpose! They successfully keep the neck plate in place and in contact with the body!
0
0
Raportoi ongelmasta
M
Correct for Fender necks
At least for a vintage Jaguar project I'm working on. I don't believe Fender ever used anything else for their necks, so this will do the job.
0
0
Raportoi ongelmasta
a
Quality product
These are good quality screws and fit perfectly. Only negative thing for me is the price. I think for such simple thing it should be cheaper and you could probably find a cheaper alternative at your local appliance store. But using these at least you would not need to worry - they fit well and hold the neck as they should.
0
0
Raportoi ongelmasta
