Gravity MS 231 HB Microphone Stand

193

Microphone Stand

  • One-hand grip
  • Long microphone stand with a round base and soft touch surface and one hand height adjustment
  • Without a boom
  • Heavy zinc die-cast round base
  • Base diameter: 270 mm
  • Height adjustable from 1080 - 1750 mm
  • Powder-coated
  • Weight: 4.4 kg
  • Includes black coding rings
  • Suitable additional weight: MS 2 WP, Article Nr. 411517 (not included)
Myynnissä vuodesta Heinäkuu 2017
Tuotenumero 411519
Myyntierä 1 kappaletta
Stand type One-handed tripod
Colour Black
Foot Round base
Max. height - min.height 1080 mm – 1750 mm
Verstelbare Hengel 0
Connection 3/8" 5/8"
Main tube adjustment 1
Näytä enemmän
42 €
Sis. ALV. Ei sisällä 12 € rahtikulua
Varastossa
Varastossa

Tuotetta on varastossa ja se voidaan lähettää heti.

Tietoa lähetyksestä
Arvioitu toimituspäivä Torstai, 2.05. - Perjantai, 3.05.
1

193 Asiakkaiden arviot

4.6 / 5

Sinun pitää kirjatua sisään, jotta voit arvostella tuotteita.

Huomio: jotta vältymme kuulopuheisiin, epätäydelliseen tietoon tai mainontaan perustuvia arvosteluja, niitä saa tehdä vain asiakas, joka on tuotteen meiltä ostanut.

Sisäänkirjautumisen jälkeen löydät kaikki arvosteltavat tuotteet kohdasta “Arvostele tuotteita” asiakastililtäsi.

Käsittely

Vakaus

Työnjälki

116 Arvostelut

c
Hyvä perusständi
customshop 05.04.2023
Toiminut oikein hyvin ja riittävän vakaa ainakin kevyeen käyttöön. Pohjalevy sopivan painava ja varren pituuden säätö onnistuu näppärästi ja nopeasti käsipainikkeella.
Käsittely
Vakaus
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
T
Great for the price with a couple of quirks
TheSnoogans 09.12.2021
I'll try and keep this short.

Pros:
— Easy assembly and handling
— Stand has a good bit of weight to it, feels sturdy and secure
— A minimal design, no-nonsense straight to the point mic stand

Cons:
— Handbrake button is quite hard to press, I didn't expect the mechanism to be so tight. Would be nice to have some sort of feedback from it, like a click when it's pressed.
— Ironically, the upper tube slid down with just a little bit of pressure, so I had to disassemble the stand and tighten the hex nut on the bottom of it.
— This, in turn, revealed some shoddy glue work in that spot, but hopefully I can forget about it forever seeing as stand works as intended after tightening.

Overall it's easy to recommend this stand even considering the cons I've listed for the price and convenience of having a handbrake mechanism alone. It's not going to blow your mind, but it'll do the job 99% of the time.
Käsittely
Vakaus
Työnjälki
3
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
p
Very stable stand on small floor space
povesteam 08.05.2021
I tested the stand with photography umbrella + flash, and also with SM58 microphone.

Pros:
- The stand is occupying a small space on the floor, while being very stable.
- It returns to its balanced position even when inclined at 30 degrees from the vertical axis.
- The construction is sturdy, it does not wobble.
- The one-hand height adjuster is easy to use, although you need a little force to move it.

Cons: none

Before buying, I was thinking about adding the Gravity MS 2 WP extra weight, but didn't order it after all. The stands works very well without the extra weight.
Käsittely
Vakaus
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
MM
Easy handling and good quality
Mick M. 29.10.2020
I love the handbrake handle and it works great even using an Elvis microphone. Highly recommended
Käsittely
Vakaus
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta