Lehle P-Split III

85

Splitter, DI box and problem solver

  • High-impedance Lehle Transformer HZ with phase and ground switch
  • Can be used unbalanced or balanced
  • passive - does not require a power supply
  • Applications: Split an input signal to the two outputs with galvanic isolation (no ground loop)
  • Eliminates unwanted hum noises
  • Passive Mono Summer for stereo signals
  • Input: 6.3 mm stereo jack
  • DIR output: 6.3 mm stereo jack
  • ISO output: 6.3 mm stereo jack
  • Dimensions (W x D x H): 92 x 90 x 37 mm
  • Weight: 375 g
Myynnissä vuodesta Elokuu 2019
Tuotenumero 471196
Myyntierä 1 kappaletta
Type Splitter
LED Display No
PSU Connector No
Shape Desktop
MIDI Interface No
Number Of Channels 1
Inputs 1
Outputs Per Channel 2
Design Desktop
Näytä enemmän
139 €
Sis. ALV. Ei sisällä 12 € rahtikulua
Varastossa
Varastossa

Tuotetta on varastossa ja se voidaan lähettää heti.

Tietoa lähetyksestä
Arvioitu lähetyspäivä Lauantai, 30.03. mennessä
1

85 Asiakkaiden arviot

4.9 / 5

Sinun pitää kirjatua sisään, jotta voit arvostella tuotteita.

Huomio: jotta vältymme kuulopuheisiin, epätäydelliseen tietoon tai mainontaan perustuvia arvosteluja, niitä saa tehdä vain asiakas, joka on tuotteen meiltä ostanut.

Sisäänkirjautumisen jälkeen löydät kaikki arvosteltavat tuotteet kohdasta “Arvostele tuotteita” asiakastililtäsi.

Ominaisuudet

Työnjälki

63 Arvostelut

LL
A keeper
Louie Louie 28.07.2020
We were a bit hesitatnt to spend such a lot on the Lehle, but we needed a re-amping solution quickly. Boy, I'm glad we did. This thing is built like a tank, so versatile, and gives perfect quality results.
I don't know how we've ever managed without it, actually.
I must have a good look at the rest of their products.
Ominaisuudet
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
T
ThisguyGotthis 30.11.2020
Now u r thinking how it sounds? So was I. Well It does alter then sound a little bit, as anything u would connect would do, but in a good way taking off a small bit of transients. Like a compressor would do, but the amount is miniscule, and is kinda miraculous how the unit doubles the input and gives u two signals so pristine, without electric power supply. Also If it was active, it would change the sound so much more. As a passive DI also is a very good transparent/no coloration one. Kinda like the Neve and BSS DIs, and unlike the Radial coloration ones like J48 and JDI, witch I love If I want coloration, as It depends on the task. So it?s a no fear of loosing tone box, very well made, and I just give the four stars in finish for some bubbly details on the finish paint , but sending it back for that would be nonsensical. Thomann just sent this and other expensive non PRC with the items boxes floating and crushing around each others doing some minor cosmetical injury in the boxes. I wish they just put a bit of protection inside. But again not something that would made me sent stuff beck. In a peculiar german fashion the factory box for the lehle is very good but is so hard to keep using the box to store the unit, becouse is hard enough to put it back! I guess not many people would use the box to keep the unit, but still, they could easely improve this. All in all u get a non perishable piece of european/german engineering, worth every euro, and will give u more u paid for in sound quality. Unlike cheap stuff u will never regret over it. If u want stereo guitar or bass, or using different signals, plus a passive DI for free, (and there r more things this unit can do!), go buy one, and rest assured It will not rob your tone. Superb.
Ominaisuudet
Työnjälki
2
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
L
Multi-functional signal splitter
Luke-dool 15.10.2021
Bought this to split a guitar signal to an amp and straight to audio interface. Not only did it do that as good as I hoped but was also delighted to realise it can be used as a re-amp as its input will accept line level also. In fact, its performance as a re-amp proved better than a dedicated re-amp I had previously bought, showing barely any coloration or noise and giving a great signal level.
Ominaisuudet
Työnjälki
5
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
m
Passive but versatile
markkus 26.08.2021
Use-case for now is splitter to two amps at same time, but also the re-amp possibility will be tested soon. Because of the passive implementation, some scenarios are not possible like converting signals to Hi-Z (Guitar) to Low-Z (Line level e.g. recording input), this means that your receiving input still needs to be able to handle Hi-Z. Low-Z can be output as Hi-Z, making a re-amping setup possible (sending your recorded guitar signal to an amp). Other excellent features are the phase switch and ground hum relieve. I did have to look at the online downloadable manual, because it has more examples and explenation than the included paper manual. Build quality looks and feels excelllent, colour-ation of sound is almost impossible to notice when in an dual amp setup, as the dual amp causes more impact on what you hear. Maybe a blind test with individual amp recordings in a lab setup could reveal this, but imo this difference isn't noticable in a dual amp live recording setup. My previous dual amp setup with a EHX paralel mixer (with sends to the amps) was a lot more noticeable because of the added noise..
Ominaisuudet
Työnjälki
1
1
Raportoi ongelmasta

Raportoi ongelmasta

Liittyvät YouTubesta