Stairville xBrick Full-Colour 16x3W

240

LED Effects

The new xBrick Full-Colour is a professional LED floodlight with extremely compact dimensions and excellent colour mixing.

The 16 piece high-power RGB LEDs provide an enormous light output, leaving RGB colour shadows as a thing of the past.

The desired colour is mixed directly under the lens, and the device provides the user with different control options, such as DMX 512, automatic mode, music mode (Sound-to-Light), and Master/Slave mode, allowing the xBrick to be used almost anywhere. Via the LCD display all functions of the xBrick can be easily adjusted.

Via the double bracket the device can be set up on the ground or mounted on a truss, wall, or ceiling. No matter whether on stage, in the architectural field, at fairs and exhibitions, nightclubs, or countless other applications, the xBrick Full-Colour does an excellent job.

  • Light source: 16 LEDs 3 W Tri colour RGB
  • Power supply: AC100-240 V 50/60 Hz
  • Max. power consumption: 60 W
  • Beam angle: 30°
  • Control: DMX-512 mode (5 or 13 channels), Automatic mode, Sound-to-Light mode, Program mode, Master/Slave
  • LCD Display
  • DMX In- and output: 3-Pin XLR
  • Power in- and output: IEC (cold device plug)
  • Dimensions: (L x W x H) 365 x 215 x 70 mm (with bracket)
  • Weight: 3 kg
  • Suitable diffusion filters: + 25° Art.470701 and + 40° Art.470702 (both not included)
Myynnissä vuodesta Heinäkuu 2011
Tuotenumero 259187
Myyntierä 1 kappaletta
Outdoor No
Number of LEDs 16
LED Power 3
Colour Mixing RGB
LED Type x-in-1
Fanless Yes
Remote control not supported
wireless DMX No
Housing Colour Black
Individually controllable LEDs No
Length 0,3 m
Numbers of LED´s 16
single LED power 3 W
Colour mixing RGB
Floor housing 1
No fan 1
Remote not supported
Beam angle min. 30 °
Beam angle max. 30 °
Näytä enemmän
111 €
Sis. ALV. Ei sisällä 12 € rahtikulua
Varastossa
Varastossa

Tuotetta on varastossa ja se voidaan lähettää heti.

Tietoa lähetyksestä
Arvioitu lähetyspäivä Lauantai, 30.03. mennessä
1

240 Asiakkaiden arviot

4.6 / 5

Sinun pitää kirjatua sisään, jotta voit arvostella tuotteita.

Huomio: jotta vältymme kuulopuheisiin, epätäydelliseen tietoon tai mainontaan perustuvia arvosteluja, niitä saa tehdä vain asiakas, joka on tuotteen meiltä ostanut.

Sisäänkirjautumisen jälkeen löydät kaikki arvosteltavat tuotteet kohdasta “Arvostele tuotteita” asiakastililtäsi.

Valoteho

Työnjälki

161 Arvostelut

A
Kelpo laite hintaisekseen, kestävyydessä vähän sanomista.
Tuntematon 01.04.2016
Valotehoa löytyy varsin paljon tähän hintaan. Pientä fuulaa värimiksauksessa ja takanäytön suojapaneeli tuntuu lähtevän ihan kättelyssä kaikista irti, samoin sankojen kiristimien ollessa muovia menevät rikki käsittelyssä. Dimmerikurvi on kanssa varsin erikoinen, melkein heti puolella teholla kun koskee arvoihin joten nätit ja pitkät dimmaukset ja minimiteholla ajelu on aika mahdottomia.

Yhdestä 16 kpl, joita on käytössä on yksi kappale onnistunut kehittämään yhteen pikseliin sinisen ledin toimimattomuuden. Kattellaas miten takuu pelaa asian kanssa.

Allinall, varsin tehokas vehje pienin rajoituksin tähän rahaan.
Valoteho
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

KJ
I have seen the light
Kari J 14.10.2022
First gig with this light and everything went as planned. Easy to set up and the brightness was more than I expected.
Valoteho
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
PR
Very Nice lights. Missing only one feature.
Pete R. 29.07.2014
I have had 10 of these units for the past 3-4 years (Mk1) and toped up with 6 more (Mk2) within the last year or so, had no real issues only that they blow fuses quite regularly and 1 did get returned (Mk1) under the 3 year warranty as it failed to come back on. This as always with Thomann was easy and fast.
They have a spare fuse holder in the IEC connector so I keep fuses in them for when they blow, i probably use the lights 10 times a year for 2 days at a time and would estimate that every other time they are out a fuse blows.

If you are using the lights to uplight a wall, the stands do get in the way and are not tall enough to allow an XLR to sit in the DMX socket without caching the floor, I have got around this by adding some stands, but if you are flying these or using them as a general wash this isn't an issue.

The main feature that is missing which is a real pain for me, is the ability to set a solid colour. You have the ability in standalone mode to set either "Fade" which fades through the colour spectrum at a chosen speed, "Sound" which plays back patterns in time with music or "Colour" which I would expect to be able to set for instance red or blue, so the light stays on a pre selected colour but this setting scrolls through different colours without fading or the ability to adjust the speed.
So the only way to keep the lights on lets say red all the time, is to DMX them together and have a control desk, a real pain if you have 16 lights around a marquee and you want to alternate red and white, especially if you are uplighting the walls as the addition of the DMX lead means you need an additional stand to get the angle right with out the DMX cable hitting the floor.

All in all a very nice light but the lack of a solid colour option means that they are sometimes a pain to use. Not really recommended for architectural use as the fuses do blow.

The Mk2 update was nice with the IEC Loop out.
Valoteho
Työnjälki
5
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
A
Man are these things bright
Tuntematon 16.03.2016
Warning. If you are going to use these for mobile DJ and small venues, don't use them in standalone mode they will blind your audience. They are seriously bright and they only way they are useable for me is to run them via DMX and turn the brightness down on them.

The output is not beams but a wash so bare that in mind. They are great for floor mounting and pointing at backgrounds and ceilings etc, but I would avoid pointing them directly at your dancefloor area. My favourite way to use these is using all white and running chases from my DMX controller. That effect is really cool on them, and if your DMX controller will flash fast enough, they strobe nicely (or in 5 channel mode you can strobe from the unit on channel 5)
5 or 13 channel mode,
5 channels gives you R G B control, brighntess and strobe. The disadvantage in this mode is all 16 LEDs are the same colour.
in 13 channel mode, you control 4 banks of 4 LEDS and can control RGB for each bank. Channel 13 for brightness.

It's a shame they didn't utilise channels 14 and 15 for a strobe function in this mode, and also to range through the pre-programmed modeds like other Stairville lights do,

All in all though, a whole lot of light output for the money, and very useful in any setup.
Valoteho
Työnjälki
3
0
Raportoi ongelmasta

Raportoi ongelmasta