Thon Case Blackmagic ATEM Mini

26

Flight Case

  • For a Blackmagic Design ATEM Mini, ATEM Mini Pro, ATEM SDI or ATEM SDI Pro ISO
  • Material: 6.5 mm Phenol plywood
  • 22 x 22 mm Aluminium edges
  • 2 Mini butterfly latches
  • 1 Suitcase handle
  • 8 Ball corners small
  • 4 Rubber feet 25 x 15 mm
  • With foam padding
  • Includes 90 mm clearance behind the unit
  • Connections are freely accessible
  • Exterior dimensions (W x D x H): 300 x 245 x 130 mm
  • Weight: 2.3 kg
  • Colour: Phenol Brown
  • Made in Germany
Myynnissä vuodesta Toukokuu 2020
Tuotenumero 492751
Myyntierä 1 kappaletta
Construction Type Flight Case
Material Multiplex
Colour Brown
Weight 2,3 kg
111 €
Sis. ALV. Ei sisällä 12 € rahtikulua
Saatavilla 2-3 viikon sisällä
Saatavilla 2-3 viikon sisällä

Tuotetta saatavilla pian varastoon ja lähetykseen.

Tietoa lähetyksestä
1

26 Asiakkaiden arviot

4.8 / 5

Sinun pitää kirjatua sisään, jotta voit arvostella tuotteita.

Huomio: jotta vältymme kuulopuheisiin, epätäydelliseen tietoon tai mainontaan perustuvia arvosteluja, niitä saa tehdä vain asiakas, joka on tuotteen meiltä ostanut.

Sisäänkirjautumisen jälkeen löydät kaikki arvosteltavat tuotteet kohdasta “Arvostele tuotteita” asiakastililtäsi.

Vakaus

Työnjälki

13 Arvostelut

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
M
Very secure case
MattAyers 04.10.2020
A very secure case for the ATEM mini. It has plenty of padding and holds the ATEM mini securely. The cutout in the padding at the back allows easy access to the connectors on the rear of the device. Very pleased and will keep the ATEM mini safe and secure during transport.

The main con I can see is that the clips holding the lid in place when closed are longer than the cutout for the clips and hence you have to turn the handel and push the clip in at the same time to get it to close and latch. Not a major problem, just slightly inconvenient.
0
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
R
Solid!
Robert94k 08.01.2021
Proper solid case and perfect to fit my atem black magic in
Vakaus
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
P
Takes care of the mixer
Pettersmart 07.11.2020
but the lid is a little tight when it is to be opened
Vakaus
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate de
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
D
Exakt passend. Aber nicht mehr.
Dosi 01.11.2020
Ich war auf der Suche, nach einem Case für mein ATEM mini, damit ich es sicher lagern und Transportieren kann.
Dieses Case passt genau für das ATEM mini, aber das war es dann leider auch schon. Es passt das ATEM mini rein, das Netzteil und vielleicht noch ein Käbelchen. Aber mehr leider nicht.

Ein unglaublich schweres Köfferchen, in dem man nur das allernötigste unterbringt.

Ich habe das Case zurückgeschickt und stattdessen ein größeres Universalcase bestelllt, in das dann nicht nur der ATEM mini reinpasst, sondern auch das Netzteil und die benötigten Kabel. Denn wenn man ehrlich ist, braucht man im Einsatz ja weit mehr als nur den ATEM.

Darüber hinaus ist die Verarbeitung auch nicht sehr gut. Das Inlay ist so reinverklebt, dass der Kleber auch das Case mit zu klebt. Es lässt sich öffnen, aber nur schwer.
Vakaus
Työnjälki
0
1
Raportoi ongelmasta

Raportoi ongelmasta