LP LPCMM Cajon Mic Mount

12

Support de microphone pour Cajon

  • Compatible avec la plupart des cajones
  • Barre en aluminium
  • Longueur de la distance du microphone réglable
Référencé depuis Mars 2019
Numéro d'article 460958
Conditionnement (UVC) 1 Pièce(s)
Type de composant Pince micro
Type Support de microphone
49 €
TVA incl. ; Supplément de 5,90 € pour l´envoi
Disponible immédiatement
Disponible immédiatement

Cet article est disponible en stock et peut être envoyé immédiatement.

Informations sur l'expédition
Expédition estimée le Samedi, 20.04.
1

12 Évaluations des clients

4.6 / 5

Vous devez être connecté afin de pouvoir évaluer un produit.

Note: Afin d’éviter que les évaluations de notre site soient polluées par des “ouï.dire”, des approximations ou encore de la publicité clandestine, nous autorisons uniquement nos clients à évaluer les produits achetés chez nous.

Une fois connecté, vous trouverez dans votre compte client, via le lien "Évaluer des produits", tous les articles que vous pouvez évaluer.

Qualité de fabrication

10 Commentaires

c
parfait
cherrydon 14.06.2020
Pour le joueurs de Cajon qui n'arrêtent pas de bouger, voici la solution, c'est top
Qualité de fabrication
0
0
Signaler l'évaluation

Signaler l'évaluation

R
Fait très bien l'affaire pour un Cajon en live
RiotDrums 03.07.2019
A cependant tendance a vibrer un peu si le micro est assez lourd
Qualité de fabrication
0
0
Signaler l'évaluation

Signaler l'évaluation

google translate gb
Une erreur est malheureusement survenue, veuillez réessayer ultérieurement svp.
SD
LP LPCMM Cajon Mic Mount Does the Job
Stooshie Dave 06.10.2019
My only problem with the mic mount is actually more to do with the specific cajon I use; a Schlagwerk La Peru, which I have used for more than 10 years. The adjustable bracket on the mic mount does not open wide enough to fit over the support framework of the cajon inside the bottom of the sound port. This means i have to attach the mic mount upside down at the top of the sound port. Not a major issue, but slightly annoying.
Qualité de fabrication
0
0
Signaler l'évaluation

Signaler l'évaluation

google translate gb
Une erreur est malheureusement survenue, veuillez réessayer ultérieurement svp.
J
Great product, a few design problems
Jakica2 08.03.2024
The mount is very sturdy, but there are 2 things problematic with it:
1. The mic mount should have some kind of rubber on the bottom of the thread, as mics tend to unscrew and then they don't point to the hole on the cajon (I am looking at you, Beta 52a)
2. The screw that holds the mic mount rod is a bit problematic, as it interferes with XLR connector for the mic. Even with the L XLR connector, it is a problem to screw the rod in place, and then plug the XLR cable. Maybe the problem are Betas 56a/52a, but still, it is a nuisance.

Everything else is very good, its firm, holds onto the cajon and doesn't go anywhere. You don't even notice it while you play, and if you are a drummer that moves with the cajon while playing it, this is a thing for you!
Qualité de fabrication
0
0
Signaler l'évaluation

Signaler l'évaluation