R
Good starter scanner
***pros***
- good value (cheap), plus no bulbs to replace
- compact, decent light output
***cons***
- kind of requires a hard case. I have two in an arriba ac145 bag with a wedge of foam to keep the mirrors in place during travel, but worry about them - a hard case would be better.
- stepping motor is quite jerky - noticable on slow movements (if you use dmx)
- good value (cheap), plus no bulbs to replace
- compact, decent light output
***cons***
- kind of requires a hard case. I have two in an arriba ac145 bag with a wedge of foam to keep the mirrors in place during travel, but worry about them - a hard case would be better.
- stepping motor is quite jerky - noticable on slow movements (if you use dmx)
2
0
Report
A
very nice for the price
i bought this light to add to my collection of gear for djing, i used it with a budget priced stairville fog machine and the effects where very good. this light is easy to set up i used a t bar light stand and got it up as high as i could to get the most coverage on the floor.light is bright for what it is, effects are good. ideally would be best suited with 2 of these going at the same time using a dmx controller, i always just used the mic feature and it went to the music very well. the only downside to this light feature is that the power cable is stupidly short, which is very annoying as i had to strap a ext. cable to my stand up at the light which doesnt look great. that aside it is a great budget light.
1
0
Report
T
Outstanding Scanner for the price
I bought the SC-100 bundle for small parties. The bundle included two scanners, DMX cable and remote control.
- First Impressions:
When I first got the light and was able to feel it, I was impressed by the quality of the build itself, very sturdy build made of metal while still being lightweight. Noticed the power cable was a bit short.
- First Run:
On the first run I was very happy to see that the LED's were very bright and that the beam of light was spot sharp. Very nice matrixx effects for its price and a great sound-to-light mode with the scanner hitting the low notes on point. The only "bad" thing I noticed was a high-pitched sound that could be heard when there was no music, but it was a great first run overall.
- Additional opinions:
On slow movements the light show is a bit jerky (but it would be expected with step motors)
Very nice remote control with a great blackout and strobe options.
Best results when used with smoke.
Two lights in master / slave mode with sound-to-light and remote control make for a great light-show!
Overall, an amazing light for the price.
- First Impressions:
When I first got the light and was able to feel it, I was impressed by the quality of the build itself, very sturdy build made of metal while still being lightweight. Noticed the power cable was a bit short.
- First Run:
On the first run I was very happy to see that the LED's were very bright and that the beam of light was spot sharp. Very nice matrixx effects for its price and a great sound-to-light mode with the scanner hitting the low notes on point. The only "bad" thing I noticed was a high-pitched sound that could be heard when there was no music, but it was a great first run overall.
- Additional opinions:
On slow movements the light show is a bit jerky (but it would be expected with step motors)
Very nice remote control with a great blackout and strobe options.
Best results when used with smoke.
Two lights in master / slave mode with sound-to-light and remote control make for a great light-show!
Overall, an amazing light for the price.
0
0
Report
A
I used a pair of these fixtures at a venue with about 150 people, and they had enough light power to produce great looking effects! Smoke is essential! :)
The mirror part needs protection if you move these fixtures between gigs, and you can't do "slow" scanning, as it's jerky on low speeds.
The mirror part needs protection if you move these fixtures between gigs, and you can't do "slow" scanning, as it's jerky on low speeds.
0
0
Report
Id
Excellent quality product
i purchased two of these items for Disco's and Shows the robots (Intellegent lights) are fantastic additions to build a great athmosphere especially when set on the chase setting
0
0
Report
G
Adding some interest to your lighting on a budget
Taking lights from simple colours to patterns can be difficult as many light produce a tiny number of patterns with little control... the 'better' options are often much more expensive. These seem to fit well in the middle where you might not have significant sums to spend, but you want something with that degree more control and plenty more in the way of patterns. With both horizontal and vertical control, pattern (inc colour) and strobe choices over 4 dmx channels or the more simple hand controller these lights certainly add levels of interest without hurting the bank!
1
1
Report
M
Lot of light for the money
This fixture really stands oit on stage with really visible beams. i use the on the stage floor and the beams go upwards from behind the performers.
The movement of the beams is done by steps so no smoth change of positions. But a really good fixture to use for effect.
i use it with a avolotes azure 2000.
The movement of the beams is done by steps so no smoth change of positions. But a really good fixture to use for effect.
i use it with a avolotes azure 2000.
0
0
Report
G
Good scanner
Works well on built-in mic as a downlighter and also for long-throw laser effects through fog. Only use DMX for blackout.
Very good splay and excellent cheaper option to a moving head device.
Have kept it in carton for transport and protection and the whole carton fits into the STAIRVILLE SB-120 BAG 480 X 260 X 250 MM. Great!
The grey foam mirror protector can be slit down from one end so that it can be slid on and off for transport to immobilise and protect the mirror.
Great light!
Very good splay and excellent cheaper option to a moving head device.
Have kept it in carton for transport and protection and the whole carton fits into the STAIRVILLE SB-120 BAG 480 X 260 X 250 MM. Great!
The grey foam mirror protector can be slit down from one end so that it can be slid on and off for transport to immobilise and protect the mirror.
Great light!
0
0
Report
