Behringer HA6000

126

Headphone Amplifier

  • Professional headphone amplifier system for stage and studio applications
  • 6 Independent stereo high power amplifiers in 1U
  • 6 Direct aux inputs
  • High and low EQ per channel for perfect sound matching
  • Output level control with LED output counter per channel
  • Mono / stereo switch per channel
  • 6.3 mm Headphone output on front and back
  • "Planet Earth" switching power supply for maximum flexibility (100 - 240 V ~)
  • Type: 19", 1 U
Available since October 2017
Item number 417096
Sales Unit 1 piece(s)
Number of stereo channels 6
Output Level Adjustment Per Channel Yes
Amount Of Inputs 6
Rack format Yes
205 €
All prices incl. VAT
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
Delivery free of charge expected between Monday, 8.04. and Tuesday, 9.04.
1

Headphone amp for up to 12 pairs of headphones

The Behringer Powerplay HA6000 is a powerful six-channel headphone amplifier for connecting up to 12 pairs of headphones at once. The volume of the six independent amplifier channels can be individually adjusted, and it does not matter whether the connected pairs of headphones have different impedance values. Each channel has two connection sockets for headphones, and both outputs can be used simultaneously so that a total of up to twelve pairs of headphones can be supplied with sound. The routing options are where it gets really exciting, however: In addition to the main signal, another signal can be mixed into each channel via the AUX input. The Behringer HA6000 also takes up just one rack unit, while the power supply is suitable for voltages between 100V and 240V.

Mixing playback and solo signals made simple

The Behringer Powerplay HA6000 can handle headphone monitoring in the recording studio or serve as the core of an in-ear setup for a complete live band. For level control, there is an LED meter for the main input and one LED meter per channel for the output level. Behringer specifies a minimum headphone impedance of eight ohms, so the HA6000 should be ready for any eventuality. An EQ section is provided on each channel, with which bass below 80Hz and treble above 12kHz can be boosted or cut by 12dB. With the AUX input, a "more me mix", i.e. a mix of playback and solo signals, can be created very quickly. With the balance control, the volume ratio of these two signals can then be adjusted by the musicians themselves. Since the input signal of the main input is looped through to the main output, several Behringer HA6000 units can be connected to form a multi-channel monitoring setup.

For studio, live, and DJ applications

The Behringer HA6000 will capably handle every application from band rehearsal room to professional broadcast studio, because the requirements of both are usually the same: To deliver a clean and sufficiently loud monitoring signal, regardless of what (and how many pairs of) headphones are connected. Each channel on the Behringer features two outputs - one on the front panel and one on the rear - which will be immensely helpful for users who want to hardwire the headphone amplifier into a studio or live rack. Some singers and many DJs prefer monitoring with one headphone side - for this, the HA6000 offers an individually switchable mono mode for each channel, so the user can choose whether they want to monitor the left, the right, or a summed mono signal.

About Behringer

The company, which was founded in Germany by Uli Behringer and now manufactures its products in China, has been known for affordable and great-value equipment since its very first product, the Studio Exciter F. An array of mixing consoles (such as the Eurodesk MX8000), signal processors, and later sound amplification and monitoring equipment, has made it possible for countless musicians to fit out their home studios, practice rooms, and mobile PAs within budget limits that were previously unthinkable. The acquisition of other companies, including Midas, Klark Teknik, and TC Electronic, meant that new product groups were added - and also resulted in the technical expertise of these companies being incorporated into product development.

Stereo mix for up to six band members

Supplying a complete band, a vocal ensemble, or a brass section with headphone signals usually requires extensive signal routing. The Behringer Powerplay HA6000 headphone amplifier simplifies this task enormously thanks to its practical AUX input - an advantage that it can fully exploit in both studio and live operation: In combination with a digital rack mixer like the Behringer X32 Rack (article no. 310536), a complete in-ear setup including a "more me" stereo mix for up to six band members can be created with just four rack units. During a recording session, keyboardists can connect closed-back studio headphones, such as the Beyerdynamic DT-770 Pro, which have an impedance of 250 ohms, while singers can use the in-ear monitors that they are accustomed to using for live performances, e.g. the Sennheiser IE 100 Pro Clear (article no. 512717).

126 Customer ratings

4.7 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

handling

features

sound

quality

68 Reviews

AF
Great Headphone Amplifier
Artur F 26.10.2020
It is a very nice headphone amplifier. Sounds good and find lots of use in the studio, especially for life recordings. However there two things to note. The first is the counter-intuitive feature with "balance" knob. The front panel says AUX < > MAIN, so the first thing I did was turning the knob all the way to MAIN. Then there were a couple of hours of struggle, as I only got the sound in one ear. I re-checked all the possible cable combination in order to locate the fault with no luck. I was about to start filing the return. Then I decided to read the manual very carefully and found the note with small font: "when AUX jack is not inserted the balance knob acts as a LEFT-RIGHT balance". Damn it. They should have pointed that out with bold and large font. The other thing is the power. It is pretty much OK with 250 ohm headphones in a rather quiet environment, but I feel that if I am going to record some louder music then I might run into problem of headphone volume being too low...
handling
features
sound
quality
3
0
Report

Report

NL
Very good for it's Price
Niclas L. 21.02.2021
It does what it's supposed to.
If you are looking to connect up to 6 headphones to the same audio source you can do that with this amp. But you can also use each channel individually. Each Channel has 4 knobs to control the bass, treble, source and level. The knobs feel very smooth and responsive. The overall build quality doesn't feel cheap and is very stable. I didn't have any problems with it so far (about 4 months) and each input and output works.
The sound is decent, but you will hear audible noise at higher levels. You won't hear it through loud music though.
If you are looking for a cheap Headphone amp that will power many headphones, I highly recommend this one.
handling
features
sound
quality
1
0
Report

Report

G
NICE!
Ghost853 23.02.2022
The best simple multifunction headphone mixer i have used for many years.
handling
features
sound
quality
1
0
Report

Report

EK
Erik Kamenar 06.10.2020
Great headphone amplifier. A lot of possibilities and quality sound.
handling
features
sound
quality
1
0
Report

Report