Behringer CT100

562

Cable Tester

With the CT100 almost every cable can be tested: XLR, jack mono and stereo (6.3 mm, 3.5 mm, TT), RCA connector and MIDI. Separate LEDs indicate, which input is connected to which output. LED indicators for shielding and phantom power are available as well. Next to the continuity test, the CT100 provides and intermittent test and a test tone generator.

  • Micro-Processor-Controlled cable tester
  • For XLR, mono- and stereo-jack (3.5 mm / 6.3 mm), TT, RCA and MIDI
  • Detection and indication of intermittent contacts
  • Test of phantom power and ground loops
  • Build in test tone generator
  • Battery operation with 2x 1,5 v AA batteries (Not included)
katalógusunkba bekerült: Október 2001
Termékszám 149962
mennyiségi egység 1 darab
Cable Tester Yes
Level Meter No
Speaker Tester No
Software No
11 890 ft
ÁFÁ-val, plusz 6 900 ft szállítási költség
3-4 héten belül szállítható
3-4 héten belül szállítható

A termék hamarosan megérkezik raktárunkba, ezt követően rövid időn belül szállítható.

Szállítással kapcsolatos tájékoztató
1

562 Ügyfelek értékelései

4.6 / 5

A termékek értékeléséhez kérjük, jelentkezz be.

Megjegyzés: Mivel szeretnénk megakadályozni, hogy az értékelések szóbeszéden, hiányos ismereteken alapuljanak, vagy rejtett reklámok legyenek, csak valós ügyfeleink számára tesszük lehetővé értékelések írását, akik valóban tőlünk vásárolták meg a terméket.

A bejelentkezést követően az ügyfélközpontban, a "Termékek értékelése" menüpont alatt megtalálsz minden terméket, amelyet lehetőséged van értékelni.

tulajdonsagok

kivitelezés

270 Vélemények

v
great, but not so logical
vz42 24.06.2021
it's a great cable tester generally, but logically it's a bit overcomplicated, if you want to know, which pins are connected to which pins.
kivitelezés
tulajdonsagok
0
0
Jelentem!

Jelentem!

google translate gb
Sajnos hiba történt. Kérjük, később próbálkozz újra.
S
Tone function not calibrated and depend on battery
Shummi 30.11.2021
Tone are not calibrated and depend on battery voltage
+4dBu is 3.472Vpp, this cannot be provided by 2 x 1.5 Volt battery...
- The amplitude depends on battery voltage, my measurements 1 kHz
@3Vdc +4dBu = 3.18 Vpp should be 3.472Vpp
0dBV = 3.0 Vpp should be 2.828Vpp
-50MIC = 300-400 mVpp should be 6 if dBu or 9mVpp if dBv,
see also -50MIC waveform +4dBu meas 3.36 Vpp should be 3.472Vpp
@2.5Vdc +4dBu meas 2.66 Vpp should be 3.472Vpp
Tone are square wave, very annoying to listen to......
They should have used a 4.5V supply, and calibrated the Tone output or made it fixed. and least added a low pass filter......
No low batt detection
I Would have paid dobble for these features
kivitelezés
tulajdonsagok
2
0
Jelentem!

Jelentem!

google translate gb
Sajnos hiba történt. Kérjük, később próbálkozz újra.
R
Pedalboard builders best friend
RaverZ 21.05.2019
This little device became my best friend when I started to build my pedalboard. (you know it's a never ending story for guitar players)

Mostly I use angled jack plugs, so by its design it can hold them in place during the soldiering process, and it tells me immediately if I did something wrong.
Effective and comfortable way to work like this.

The test tone function is really good extra to have. One time I needed it, it just saved the day.

The battery came with it still works. I bet it will last for years.

No cons. Worth every penny.
kivitelezés
tulajdonsagok
1
0
Jelentem!

Jelentem!

google translate gb
Sajnos hiba történt. Kérjük, később próbálkozz újra.
h
Great tool!
howlingwolf 29.01.2020
Behringer CT100 is a great and simple tool that does more than it is supposed to. It is well built and for the price it goes, it's a no brainer for every sound engineer dealing with cables on a daily basis.

As I work more and more in field recording, my cables are often left to the mercy of extreme weather situations and with this cable tester, I am able to identify connection problems in a matter of seconds.

Call me old-school, but in addition to that, this thing also allows me to produce and record the 1khz (or 440hz signal) at the beginning of every day for the level reference.

Thanks Behringer! :-)
kivitelezés
tulajdonsagok
0
0
Jelentem!

Jelentem!

YouTube a témában