D
K&M 16280 White
I bought this wallmount because i needed something friendly with nitro finished guitars!It has been a year since i have it and i am very happy with it! It's an excellent value for money product , it doesn't stain nitro finish it has very good stability and it looks great on a white wall! I recommend this product without any hesitation!! Thomann delivered it on time as usual!
3
0
Jelentem!
J
Perfect wall mount for nitro guitars (with a small exception!)
The concept is simple and works perfectly. The only exception is the Telecaster guitars due to the asymmetrical headstock design. My Tele fell of the wall mount once, but I contribute that to the fact that the guitar was not perfectly still when I have let go of the guitar and had continued swinging very lightly which let to slipping a few minutes later. Ever since then, I make sure that the left mount rod (above tele headstock) tightly fits and that the guitar is perfectly still and have not had problems since.
Clear recomennedation, but watch out if you plan to hang a Tele on it!
Clear recomennedation, but watch out if you plan to hang a Tele on it!
2
0
Jelentem!
N
Robust, functional and attractive.
I've had 5 (black) K&M hangers on a wall now for 15 years, and they remain rock solid. They've kept my guitars both safely off the floor, but always in easy reach and ready to play, and that's really all I need them for. The do look good too.
I have noticed that a small amount of black residue on the necks of a couple of my guitars from the rubber sleeves on the arms of the hanger. This is no big deal, as it just wipes right off very easily.
However, I got a guitar with a Nitro finish, and I'd heard that this might be more of a problem, so I switched one of the original black hangers for this white one, which is claimed to be nitro safe. Well, its been on the wall now for 6 months (other than when its being played, of course!), and absolutely no marking, marring or damage to the guitar. So job done.
If I had a minor complaint, its only that you can't get this silicon sleeving on an otherwise black hanger, so I have one that stands out a bit.
I have noticed that a small amount of black residue on the necks of a couple of my guitars from the rubber sleeves on the arms of the hanger. This is no big deal, as it just wipes right off very easily.
However, I got a guitar with a Nitro finish, and I'd heard that this might be more of a problem, so I switched one of the original black hangers for this white one, which is claimed to be nitro safe. Well, its been on the wall now for 6 months (other than when its being played, of course!), and absolutely no marking, marring or damage to the guitar. So job done.
If I had a minor complaint, its only that you can't get this silicon sleeving on an otherwise black hanger, so I have one that stands out a bit.
1
0
Jelentem!
A
Good product
This product is very good quality and I will be getting more for my other guitars.
The only gripe I have is that I wish they provided screws and plugs. I get that the manufacturer doesn't know the wall type that will be used for mounting but not being a DIY guy, I had hoped that I wouldn't have to go to the hardware store to try find the right screws and wall plugs.
But overall a great product which is kind to my guitar finishes.
The only gripe I have is that I wish they provided screws and plugs. I get that the manufacturer doesn't know the wall type that will be used for mounting but not being a DIY guy, I had hoped that I wouldn't have to go to the hardware store to try find the right screws and wall plugs.
But overall a great product which is kind to my guitar finishes.
2
0
Jelentem!
S
NOT suitable for teles headstock
I'm using this transparent hangers for my nitro finished guitars. I haven't any problem for more than 3-4 years. Recently I bought an American Original 50s tele and I bought one. Unfortunately can't support telecasters. Telecaster headstock is very small and the hanger arms aren't sturdy enough to keep the guitar from slipping away.
I have reduced one star more because the transparent plastic yellowish in time.
I have reduced one star more because the transparent plastic yellowish in time.
0
0
Jelentem!
k
A quality product
Bought this for my bass guitar. It is beautiful and easy to install - there are detailed instructions how to do it, so everyone can do it themselves. It is stable once attached properly to the wall, and the two rods are moving independently, so they adapt to the guitar head shape, and even if you make a slight mistake in the vertical alignment, when mounting the stand to the wall, they should compensate for it with the natural gravity force on the guitar.
0
0
Jelentem!
Hf
Excellent wall mount with limitations
I chose the white wall mounts of K&M, because they are European built and one of the few which are nitrocellulose-friendly. Most of the others are not and are also very poorly built. I gave it four stars, mostly due to my anxiety that the movable handles can't handle (no pun intended) heavy guitars like a Heritage Golden Eagle. But it's purely my neurosis. I think eventually it works pretty well.
The looks are very nice, they are very sturdy and actually quite good in transparent-white. However, do not expect to use it for a banjo with long pegs at the back of the head. The handles are too short and have an angle downwards. I had to buy something different for my banjo. Luckily, the banjo does not have nitrocellulose lacquer.
So, five stars for me if the handles were non-movable or could be locked. I think however, they will do pretty well. I just wish they would make a nice floor stand as well (for guitar and banjo)...
The looks are very nice, they are very sturdy and actually quite good in transparent-white. However, do not expect to use it for a banjo with long pegs at the back of the head. The handles are too short and have an angle downwards. I had to buy something different for my banjo. Luckily, the banjo does not have nitrocellulose lacquer.
So, five stars for me if the handles were non-movable or could be locked. I think however, they will do pretty well. I just wish they would make a nice floor stand as well (for guitar and banjo)...
0
0
Jelentem!
BG
I screwed it to the wall and hung up my Les Paul
It works!
PROS: Suitable for nitrocellulose paint that can be used to paint your vintage super guitars!))) The quality is better than the cheaper ones. (I have a couple of cheaper ones)
CONS: No screws in the kit!(((
It weighs calmly on the wall with a guitar, I hope it will not fall off.)))
PROS: Suitable for nitrocellulose paint that can be used to paint your vintage super guitars!))) The quality is better than the cheaper ones. (I have a couple of cheaper ones)
CONS: No screws in the kit!(((
It weighs calmly on the wall with a guitar, I hope it will not fall off.)))
0
0
Jelentem!
A
I was able to hang my guitar on the wall.its eye catching and decorative as well.The only drawback is ,it doesnt come with screws.l had to find my own screws to fit it on the wall
0
0
Jelentem!
S
Does its job perfectly as intended
Been using it for a month now, sits perfectly on the wall, holds my guitar nice as well.
I have the white version of the guitar holder, mounted seamlessly on a white wall. Since it is not very prominent, the guitar can stand out nicely when mounted on the wall. Love it!
I have the white version of the guitar holder, mounted seamlessly on a white wall. Since it is not very prominent, the guitar can stand out nicely when mounted on the wall. Love it!
0
0
Jelentem!
