Millenium BS-500 Set

5992

Set of Height Adjustable Monitor Stands

  • For near-field monitors
  • Panel surface: 23 x 23 cm
  • Height adjustable from 93-131 cm
  • Maximum load capacity: 20 kg
  • Length of the triangular base: 45 cm per side
  • Weight per pair: 6.6 kg
  • Colour: Black
  • Set of 2 in a box
katalógusunkba bekerült: Június 2009
Termékszám 228376
mennyiségi egység 1 darab
B-stock áll rendelkezésre 19 090 ft-tól
20 690 ft
ÁFÁ-val, plusz 6 900 ft szállítási költség
Azonnal szállítható
Azonnal szállítható

A termék raktáron van és azonnal szállítható

Szállítással kapcsolatos tájékoztató
Szállítás megközelítőleg Hétfő, 29.04. és Kedd, 30.04. közt.
1

5992 Ügyfelek értékelései

4.3 / 5

A termékek értékeléséhez kérjük, jelentkezz be.

Megjegyzés: Mivel szeretnénk megakadályozni, hogy az értékelések szóbeszéden, hiányos ismereteken alapuljanak, vagy rejtett reklámok legyenek, csak valós ügyfeleink számára tesszük lehetővé értékelések írását, akik valóban tőlünk vásárolták meg a terméket.

A bejelentkezést követően az ügyfélközpontban, a "Termékek értékelése" menüpont alatt megtalálsz minden terméket, amelyet lehetőséged van értékelni.

kivitelezés

2784 Vélemények

D
Strong as a bull
Deverse 29.03.2022
Material wise its solid, good option that you can put the metal spikes , or rubber legs, on the bottom; what you need in your room, you can choose
cons
the pins are wobly, but for resonance they do not respond on high output
NEVER CHANGE THE HEIGHT WHILE SPEAKER ON! YOUR FINGERS WILL REGRET IT.
kivitelezés
0
0
Jelentem!

Jelentem!

L
Millenium BS-500 Set
Lagu 30.06.2021
Ár/érték arányban kerestem állványt. Robotlámpát fogok rajta használni, az állvány egy pulton lesz, így ez a megoldás tűnt a legjobbnak. Még élesben nem próbáltam, de az első benyomások határozottan jók :)
kivitelezés
0
0
Jelentem!

Jelentem!

google translate gb
Sajnos hiba történt. Kérjük, később próbálkozz újra.
VV
9 years later still standing strong
Victor Valiant 23.06.2020
+Stands the test of time.
I've used this Millenium BS-500 Set since 2011.
For nearly 9 years now, they've kept my Yamaha HS80M up.
With an Auralex acoustic pad in between them.

+Reliable
The weight all rests on the thick metal pin,
which is pinned at the position/height you set the shaft to be.
After all these years still reliable & no sign of wear.

+Great cable relief from connector
There's a cable hook provided to attach to the shaft for cables.
I've positioned the hook to face the front rather than the backside so the XLR cable runs in an smooth curvature from front of shaft to back at the speaker.
This way the hook takes the weight of the cable, and not the connector that hangs from the speakers.
Both cable & speaker inputs remains as good as new.
Many overlook cable weight strain on the connector, and might damage either connector or speaker input after years hanging down.

+The Triangle base
Pockets are great for tierupping/spiral rolling remaining cable.
Keeping the power cables, audio cables separate etc
It stands sturdy, with metal carpet spikes provided to screw on for minimal ground contact.

+Base can be rotated as desired to fit with desks.
And speakers all setup can still rotate.
Nice black textured coating, never dusty & easy to clean.

Everything what's expected of a speaker stand to do it does.
Just make sure you don't place overly sized speakers on it.
Or let people walk around them to much.
It can take a nudge but not a bump. Cheers V
kivitelezés
9
0
Jelentem!

Jelentem!

google translate gb
Sajnos hiba történt. Kérjük, később próbálkozz újra.
CK
Solid, Semi-Stable and Good for Homestudio
Ceyhun K. 01.10.2016
Positive: These stands are easy to mount/ adjust and are solid. They are stable for as long as the floor is perpendicular and not askew, and the height of the pole is not set too high.

The triangle shaped foot is very handy not only for stabilization but also for fitting the stand in corners! The adjustability is very flexible and suits for one's needs. One can adjust the height of the pole and the direction of the surface holder accordingly.

There is a soft material on the corners of the surface holders which prevents the speaker from sliding and shocks.

Negative: Consider taking the measurements of contact surface area of the stand and your speakers before buying. I have the Yamaha HS8 which does not perfectly fit on the surface of the stand, the speaker comes 1 to 2 cm out of the surface.

The stand is not that stable when the speaker is bigger or heavy. The surface holder is sometimes difficult to rotate.

Extra: There is a piece of metal that I do not know exactly the utility of. This piece fits in holes of the pole, I use it as a sort of security, if ever the pole doesn't hold and collapses. By putting the piece of metal in the hole, one can prevent/block the pole from sliding to the ground if ever it fails to hold.
kivitelezés
5
0
Jelentem!

Jelentem!