Thon Mixercase Midas M 32R

117

Mixer Case With Padding

  • For Midas M 32R and M32R live
  • Material: 7 mm Plywood
  • 30 x 30 mm Aluminium edges
  • Foam padding
  • 4 Medium-sized spring-loaded butterfly latches
  • 4 Folding handles
  • Steel ball corners
  • 10 cm Cable duct
  • All connectors are freely accessible from behind
  • Device can be used on the lower part
  • Exterior dimensions (W x D x H): 76.5 x 55.5 x 31 cm
  • Weight: 13.1 kg
  • Colour: Phenol Brown
  • Made in Germany
katalógusunkba bekerült: Május 2015
Termékszám 362398
mennyiségi egység 1 darab
made for Midas
Type Case
Material 7 mm Plywood
Wheels No
Dockhouse No
Colour Phenol/Alu
Weight 12,5 kg
External Width 765 mm
External Depth 555 mm
External Height 310 mm
Mutass többet
116 200 ft
Minden ár ÁFÁ-val
Azonnal szállítható
Azonnal szállítható

A termék raktáron van és azonnal szállítható

Szállítással kapcsolatos tájékoztató
Díjmentes szállítás várható időpontja Csütörtök, 4.04. és Péntek, 5.04. közt.
1

117 Ügyfelek értékelései

4.6 / 5

A termékek értékeléséhez kérjük, jelentkezz be.

Megjegyzés: Mivel szeretnénk megakadályozni, hogy az értékelések szóbeszéden, hiányos ismereteken alapuljanak, vagy rejtett reklámok legyenek, csak valós ügyfeleink számára tesszük lehetővé értékelések írását, akik valóban tőlünk vásárolták meg a terméket.

A bejelentkezést követően az ügyfélközpontban, a "Termékek értékelése" menüpont alatt megtalálsz minden terméket, amelyet lehetőséged van értékelni.

stabilitás

kezelhetőség

kivitelezés

51 Vélemények

google translate gb
Sajnos hiba történt. Kérjük, később próbálkozz újra.
L
Good for occasional short trips and storage, not for daily life on the road
LutherD 15.07.2023
I got this in a bundle with my Midas M32R Live. I have another small Thon case of which I’m very happy, but this one, while adequate, inspires less confidence.

The case fits the mixer perfectly, and the M32R seems to be well enough protected. You can use the mixer while it’s in the bottom half of the case, while keeping enough room for airflow (ventilation) and you can keep the power cable connected while you shut the case. There’s even room for some extra bits and bobs in the case. However, I would not feel safe using this case for heavy or daily touring.

I use my mixer only infrequently, and it doesn’t need to be transported too much. This case is perfect for that. But I wouldn’t trust this case for more intense touring. The foam protection around the mixer is a bit thin. On the output panel side, only one rail and two upper corner cushions in the back hold the weight of the mixer when the box is vertical Also on the front (fader) side the mixer is only held in place by two small foam cutouts. A bit more foam would have made me a bit more confident.

the 7mm thick plywood also seems a bit too weak to withstand heavy touring. The large top and bottom plate bend slightly when you put a medium force or weight on it. It also scratches easily. When I transport my mixer, I need to be a careful what I put on top of the case.

The aluminium rails are sturdy, as are the handles. But the rivets used to connect them to the wood are just punctured through the wood (instead of through a drilled hole), and on the back (the inside), it looks a bit messy, with splinters and bits of wooden shavings on the inside of the case. I had to file them off with a bit of sandpaper and then tape some gaffa over the insides to make sure I wouldn’t get a splinter in the hustle and bustle of a build down, and to stop from wood dust entering the case during transport.

To conclude, this case is adequate for my use of the mixer, cause it doesn’t travel that much. But if I had to move it daily, or use it for intensive touring, I would get a better and sturdier case, with more foam, thicker plywood and better finish.
stabilitás
kezelhetőség
kivitelezés
2
0
Jelentem!

Jelentem!

google translate gb
Sajnos hiba történt. Kérjük, később próbálkozz újra.
TP
great case-flexible
Tomas Phantom 03.01.2018
great case- no dog box but its a good thing, keeps it a light console- plenty of space for stashing a router and some power cable. room underneath the desk is essentially for keep the console cool- nice touch- but could easily transport an X-touch too as a fader wing. nothing to complain out. There is a wobble if console is out in wrong. Preamps to sky-faders to floor- handles as they should if carried vertically.

well designed- legends
stabilitás
kezelhetőség
kivitelezés
1
0
Jelentem!

Jelentem!

google translate gb
Sajnos hiba történt. Kérjük, később próbálkozz újra.
CC
Very nice flight case for M 32R
Chris Chen 06.10.2018
This flightcase feels quite stable and solid.There are nothing concern about unwelcome damage when you tranport M32R in this case.Everything feel so good.The material looks nice and professional.The lock of the case is very solid and safe in case of long distance transportation.
stabilitás
kezelhetőség
kivitelezés
0
0
Jelentem!

Jelentem!

google translate gb
Sajnos hiba történt. Kérjük, később próbálkozz újra.
A
Very good product
Anonim 13.11.2016
Vert good case. Dose what it says on the tin
stabilitás
kezelhetőség
kivitelezés
0
0
Jelentem!

Jelentem!