Adam Hall PCL 10 Pro Power Conditioner

100

Power Conditioner

  • With rack lighting and volt / ampere display
  • Mains current filter and power distributor with 10A including pull-out rack lighting
  • Total load up to 2000 watts
  • AC Noise filter to reduce interference from radio frequencies and electromagnetic interference < 20 dB, 1.5 MHz - 200 MHz
  • Overcurrent protection
  • Circuit breaker
  • Suitable for all applications in recording and on stage
  • 8 Switchable connections on the rear + 1 unswitched on the front
  • Mains switch at the front
  • Dimensions (W x H x D): 482 x 190 x 44 mm
  • Construction: 19" / 1 U
  • Includes 4 cold device cables
In catalogo dal Aprile 2015
Numero di articolo 360186
Unità incluse 1 Pezzo
Number of Outputs 9
Connector For Lamps Yes
Voltage Display LED
Design 19" / 1U
Total load 10 A
B-Stock da € 243 disponibile
€ 266
Spedizione gratuita, incl. IVA
disponibile
disponibile

Questo prodotto è disponibile e può essere spedito immediatamente.

Informazioni sulla spedizione
1

100 Valutazioni dei clienti

4.7 / 5

Devi effettuare il login per poter lasciare una recensione.

IMPORTANTE: Per evitare di inserire informazioni per sentito dire, non complete o sbagliate, permettiamo di dare un giudizio delle attrezzature solo ai nostri clienti che hanno comprato la merce direttamente da noi.

Dopo il Login trovi nella tua area cliente troverete sotto la sezione "Giudica i prodotti" tutti gli articoli ai quali potrete dare un giudizio

Caratteristiche

Qualità

46 Recensioni

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
S
Introduced more noise, not less
Stian_H 10.03.2022
I have had very little luck with this, overall I would say it seems more suitable for maybe a PA system, than for home studio use.

When I had my computer equipment powered through this, instead of reducing emissions, it acted as a rebroadcaster, meaning I had the interference from the computer hitting me from both sides, instead of reducing it.

This seems to be a common issue with power conditioners, not specific to this particular model. The conditioner tries to remove noise from the mains, but if you plug in gear that itself produces noise, it will instead create a common grounds issue, instead of removing anything.

Aside from that, however, the unit itself produces noise hitting everything around it, simply by being powered on with nothing plugged in it produces noise.
Even with balanced cables, it adds a high pitched whine and hiss to the signal, meaning you have to keep all audio gear away from it.

The only way I can see this being useful, is if you keep it completely separate, plugged into a separate power circuit, and physically far away from instruments or audio cables, which defeats the purpose for my intended use.
Caratteristiche
Qualità
7
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
S
Too noisy to be good
Stevensson 10.12.2021
A while back I built my first rack and off course I was pretty sure I needed a power conditioner (many youtube clips will tell you why). The Adam Hall seemed about right in the quality for money range. At first I did have a few issues with what seemd like a faulty connection (you would here the electricity sparkle) but I could solve that. Today - upon - building an on desk rack, I suddenly realised this conditioner makes a whole lot of noise (even when just plugged in and doing nothing), so I decided to use a basic unconditioned socket (also from Adam Hall). At least it got rid of the noise and to be honest, everything worls like a charm, so I'm still guessing why I thought I needed a conditioner in the fierst place. Looks good, seems of decent build quality. Only buy if you enjoy a 60 cycle hum.
Caratteristiche
Qualità
7
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
JL
Broke within a few months
James Lupson 26.11.2020
on arrival it felt cheap, then one outlet died in a few weeks, and now its dead completely.
Caratteristiche
Qualità
4
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
B
Does exactly what it says on the tin
Binraider 22.04.2018
I had a ground loop and high frequency noise issues associated with the power supply in my home studio. Between this and a ground loop isolator it's fixed the problem. The rack mount is well thought out and would be good on the road. Only one minor problem. The IEC sockets dont have the greatest grip in the world, something to better secure cables in place might be helpful. A symptom of the standard socket design, not the device...
Caratteristiche
Qualità
1
0
Segnala un abuso

Segnala un abuso