Doepfer A-134-1 Vc Pan MKII

21

Voltage-Controlled Panning Module

The A-134 is a voltage-controlled panning module. The module consists of 2 linear VCAs, which are inversely controlled by a control voltage, i.e., the more the volume of one VCA increases, the more the volume decreases on the other VCA. The module has 2 audio inputs with an attenuator, which is assigned to both VCAs. If there is nothing plugged into the second input jack (VCA2), then the audio signal of VCA1 will also be used for VCA2. There are 3 audio outputs available: VCA1, VCA2, and Mix (a mixed signal of both VCA outputs). With the A-134, voltage-controlled stereo panning effects (VCA outputs on left / right stereo channels), mono panning effects (e.g., between 2 different audio signals), or a mixture of both functions can be implemented.

The panning function can be controlled manually and via two external control voltages (one of which is equipped with an attenuator). As control signals, the following can be used: LFO (A-145, A-146, A-147), envelopes (A-140, A-141, A-142, A-119), random (A-118), theremin (A-178), foot controller ( A-177), or the voltage of a MIDI-to-CV interface (A-190 or A-191). The panning function is displayed optically via 2 LEDs.

  • Width: 8 HP / 40.3 mm
  • Depth: 40 mm (measured at rear of front panel)
  • Current consumption: +40 mA (+12V) / -20 mA (-12V)
In catalogo dal Ottobre 2004
Numero di articolo 173988
Unità incluse 1 Pezzo
Width 8 TE / HP
€ 93
IVA inclusa,€ 15 di costi di spedizione aggiuntivi
disponibile
disponibile

Questo prodotto è disponibile e può essere spedito immediatamente.

Informazioni sulla spedizione
1

21 Valutazioni dei clienti

4.7 / 5

Devi effettuare il login per poter lasciare una recensione.

IMPORTANTE: Per evitare di inserire informazioni per sentito dire, non complete o sbagliate, permettiamo di dare un giudizio delle attrezzature solo ai nostri clienti che hanno comprato la merce direttamente da noi.

Dopo il Login trovi nella tua area cliente troverete sotto la sezione "Giudica i prodotti" tutti gli articoli ai quali potrete dare un giudizio

uso

Caratteristiche

Suono

Qualità

11 Recensioni

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
i
ichor 14.05.2021
This is quite a useful module. It does panning when that is what you need. But it is also useful for other things. The center mix output makes it effectively a VC mixer too. So, panning, VCA or VC mixer – in one!

I dont really like the feeling of the knobs and jack sockets. The knobs are a bit heavy and the jack sockets feel a bit loose. But that is a matter of taste.

Another con was that I could not find any indication which way around to put the power connector, neither in the manual nor on the module. And since it is rotated 90° from the usual Doepfer orientation the "red-stripe down" mantra fails to make sense. I got it wrong at first, but vigilantly looking at the power LEDs, I quickly turned off power before the magic smoke was let out. The module still worked fine when I got it connected correctly.

The correct orientation of the power cable is show on the Thomann product description page images. So study that before trying to connect.
uso
Caratteristiche
Suono
Qualità
2
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
A
Used for much more than panning
Anonimo 25.05.2016
I bought this module to add a bit of stereo movement to my modular synth - but it does much more than that!

One of the more common uses I have for this module is to send the signal to two different effects chains / filters, so that I can add extra reverb so certain passages, or delay only specific notes,or adjust the timbre of the sound in interesting ways.
With two sound sources input it can also be used as a voltage controlled cross-fader, very useful for creating sounds that morph over time, or expressively with added pressure to a ribbon controller for example.
It can also be used as a spare VCA if you run out!

As always with Doepfer, the build quality is spot on, the features are well considered, and it is really easy to use.
1
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
A
A very versatile module
Anonimo 04.07.2016
I purchased this primarily to automate movement around the stereo field, which is does brilliantly.

It also works well as a dual VCA, albeit one that can't be modulated by an external input at the only CV control relates to the stereo pan position and not the volume.

It's perhaps worth noticing that you would need both Level dials set at the same level to get the best effect, even if there is only one input being used as these refer to the output level and not the input.

This would be a great way to automate an oscillator's output to two different filters, automatically crossfading between the two. I can see more than one of these having a home in my rack.
0
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
ZG
Doepfer A134
Zero Gauss 24.01.2019
Such a great quality, top panner. Secret weapon!!
uso
Caratteristiche
Suono
Qualità
0
0
Segnala un abuso

Segnala un abuso