Höfner 63 H61/73B

60

Machine Head Set for Beatles Bass

  • Original mechanism set for the Beatles Bass Model 63
  • Shaft length to hole: 22.5 mm
  • Shaft width: 6 mm
  • Nickel
In catalogo dal Gennaio 2004
Numero di articolo 166048
Unità incluse 1 Pezzo
Colour Nickel
€ 88
IVA inclusa,€ 15 di costi di spedizione aggiuntivi
disponibile
disponibile

Questo prodotto è disponibile e può essere spedito immediatamente.

Informazioni sulla spedizione
1

60 Valutazioni dei clienti

4.5 / 5

Devi effettuare il login per poter lasciare una recensione.

IMPORTANTE: Per evitare di inserire informazioni per sentito dire, non complete o sbagliate, permettiamo di dare un giudizio delle attrezzature solo ai nostri clienti che hanno comprato la merce direttamente da noi.

Dopo il Login trovi nella tua area cliente troverete sotto la sezione "Giudica i prodotti" tutti gli articoli ai quali potrete dare un giudizio

Qualità

29 Recensioni

F
Con il tempo, la meccanica originale del mio basso Hofner sub' qualche danno e la sostituii con queste, peccato che i fori delle
Frankye_Gorman 16.04.2017
Ho dovuto sostituire la meccanica del basso Hofner con queste (Höfner 63 H61/73B). Anche se le distanze delle viti di fissaggio non corrispondono perfettamente alle originali, dopo un minimo adattamento tutto funziona ottimamente. La serietà e la precisione della Thomann è veramente encomiabile.
Qualità
0
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
C
NIce replacement for cheaper Hofner basses
ClubMan 31.03.2016
I ordered these tuning machines to replace the stock tuners on a Hofner Ignition Club Bass, since the original felt really cheap and clumsy. These are supposed to be the ones that go on the expensive German Hofner basses, and even they still look like guitar tuners with a plain open mechanism, they are well made and feel smooth and steady.
It's worth noting that they come with bushings and mounting screws, as a set (I was not sure because it is not mentioned in the product description).
Keep in mind though that it is not a direct replacement for an Ignition bass: some minor work has to be done in order to accomodate these tuners. The bushings are slightly larger in diameter, so the holes on the Ignition headstock need to be widened (about 1mm). Then, one of the mounting screws fits one of the existing holes, but for the other screw it's necessary to drill a new guide hole.
Qualità
6
1
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
A
Beatles Bass Upgrade
Anonimo 06.04.2015
I have fitted these to my Ignition Beatles Bass as a direct replacement for the ones it comes installed with.
As other reviewers state you will have to drill one pilot hole per machine head and half of the unused hole from the previous machine heads will be showing.
I have chosen to leave this hole unfilled and unpainted as you cannot see it unless you know its there or you are scrutinising it very closely.
You do not need to install the machine head peg guides (metal sleeves) that come with these but if you want to fit them you will need to drill the peg guide holes out to fit them (more work than is necessary in my view).
They are an excellent replacement being manufactured of higher quality metals that are not loose like the original machine heads.
Qualità
4
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
C
Perfect and authentic quality
Cees 18.05.2019
I used the Höfner 63 H61/73B tuners for a Hofner "1963" bass-guitar restoration project and they where a perfect match in style (looked the same and had the same measurements). Also the quality is sublime, they used some good materials for the knobs and gears and it runs smoothley. And the most important thing:"they stay perfectly in tune"
Qualità
1
0
Segnala un abuso

Segnala un abuso