Tama CB90F Felt Beater

174

Beater for Iron Cobra Pedal

  • Felt with rod and balance weight
Numero di articolo 101713
Unità incluse 1 Pezzo
Type Beater
€ 26
IVA inclusa,€ 15 di costi di spedizione aggiuntivi
disponibile
disponibile

Questo prodotto è disponibile e può essere spedito immediatamente.

Informazioni sulla spedizione
1

174 Valutazioni dei clienti

4.8 / 5

Devi effettuare il login per poter lasciare una recensione.

IMPORTANTE: Per evitare di inserire informazioni per sentito dire, non complete o sbagliate, permettiamo di dare un giudizio delle attrezzature solo ai nostri clienti che hanno comprato la merce direttamente da noi.

Dopo il Login trovi nella tua area cliente troverete sotto la sezione "Giudica i prodotti" tutti gli articoli ai quali potrete dare un giudizio

Qualità

69 Recensioni

D
Ottimo battente
Deimos666 10.02.2018
Ho deciso di acquistare questo battente per abbinarlo al Pearl Deamon Drive 3002. Mi ero già trovato molto bene con il vecchio Iron Cobra ed ho deciso di continuare ad usarlo sul nuovo pedale. personalmente ho tutto un'altro feeling. La risposta è decisamente migliorata. Lo utilizzo in ambito metal. non posso fare altro che consigliarlo.
Qualità
1
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
j
Easy upgrade for Iron Cobra Junior pedals
jonathanhoey 12.06.2014
My main pedals are dual Iron Cobra 900s, and as a backup I have dual Iron Cobra Juniors.

The Iron Cobras came with CB90F beaters, and the Juniors came with DS30 (dual-sided felt/rubber) beaters. I bought two CB90F beaters to replace the DS30s on the Juniors.

This is a very straightforward swap requiring only a drum key - there is a single bolt holding each beater in place, and the shafts are identical in diameter.

These beaters are lighter in weight than the DS30s. I consider this preferable - the DS30s had a tendency to rebound too far and bruise the top of my right ankle when playing fast. This has never happened to me with the CB90F beaters on either of my two sets of pedals.

There is an adjustable weight collar on the shaft which can be used for fine-tuning the weight distribution of the beater without adjusting the height at which it strikes the drum (if, for example, your batter head has a protective patch). Again, this is simple to adjust with just a drum key.

The beater shaft has a cylindrical T-bar at the top, and the beater head assembles around this. This allows the beater to 'self-level' its face against the batter head without permitting any side-to-side play - useful if moving the pedal between bass drums whose hoops are of different depths.

The beater heads are removable (again with a single drum key bolt) so they can be swapped very quickly. This means it's easy to use different beater faces (eg wood and rubber), and it also means that worn-out beater heads can be bought and replaced separately, without having to buy new shafts.

The only slightly tricky thing about fitting them is realising that they go on upside down and backwards, then rotate into position.

Overall, I would recommend these beaters as one of the easiest, yet most rewarding, upgrades to the standard beaters that come with lower-end pedals.
Qualità
2
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
SK
Wears down quicker than most beaters
Ste Keloid 23.03.2020
I like these beaters because the angle is adjustable, and I can quite easily get them hitting the head how I want. However, they do tend to wear thin quite quickly as there is only a small amount of felt on the beater.
I used these with a double pedal and found that my right beater had visibly worn much thinner than the left over just a few months.

Otherwise great. Nice sound from these, and very easily adjustable to the perfect position.
Qualità
0
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
F
Great quality
Fidesh 09.03.2020
A bit expensive, but they replace old Pearl 4-sided beaters, and as their impact is quite round and flat, they lasts longer and does less damage to my kevlar protections.
Qualità
0
0
Segnala un abuso

Segnala un abuso