Thon Case 8x LED PAR64 Short

120

Mostra traduzione

Custom-made Case

For 8 x Stairville LED PAR 64 short
Material: 7 mm Plywood
25 x 25 mm Aluminium edge
Min. 1 cm foam padding on the bottom
3 cm Convoluted foam in lid
2 Spring-loaded butterfly latches, medium
4 Folding handles
8 Compartments, each with the following dimensions: 27.7 x 27.7 x 39.7 cm
4 Steel ball corners on top
4 Stackable steel ball corners at the bottom
Exterior dimensions (W x D x H): approx. 1180 x 603 x 467 mm
Weight: approx. 23.0 kg
Colour: Phenol Brown
Made in Germany

30 30 giorni soddisfatti o rimborsati

3 3 anni di garanzia Thomann

In catalogo dal Dicembre 2009

Numero di articolo 239943

Unità incluse 1 Pezzo

Case category Headlight

Number of fixtures 8

Material 7 mm Plywood

Design of compartment Upholstered compartment

Wheels No

Locks And Catches 2x Butterfly

€ 255

Spedizione gratuita, incl. IVA

Classifica vendite

in Flight Case Luci

Comprati dai clienti che hanno visto questo prodotto

33%

comprato

Esattamente questo prodotto

€ 255

13%

comprato

Flyht Pro CX Tour Case 4 Par64 Short

€ 199

comprato

Thon Case 8x LED PAR 56 Short

€ 244

comprato

Thon Case Par 64 4in1 Long / LED

€ 240

comprato

Thon Case 4x LED PAR64 Short

€ 199

120 Valutazioni dei clienti

5 68 Clienti 4 42 Clienti 3 8 Clienti 2 2 Clienti 1 0 Clienti

4.5 / 5

stabilitá

manipolazione

Qualità

Linee guida per la valutazione

43 Recensioni

Mostra traduzione

Mostra originale

Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.

Thon Case 8x LED PAR64 Short

StephenF 26.12.2014

I have been looking for a case to transport long Par 56 cans and Par64 LED's for some time. All the cases I have looked at are just a touch to small for the large Par 56 can's. I decided to try this case from Thomann, it looked as if it may just be large enough to take the cans, which it does with ease.
The inside base of the case is lined with a protective foam, so the cans can sit nicely protected and stable. The devisions make sure all 8 of the cans do not fall over in transport and get damaged.
Quality of the build is good, if a little flimsy. I noted that the dividers may need to have small brackets added to stiffen up the top sections. The 7mm plywood has a laminated brown finish which looks as if it will stand up to a little abuse.
Overall Thormann has come up with a good compromise between build quality and finished weight. Using a thicker plywood would have made the case much stiffer but added a lot of weight.
As this is a fairly big case I was surprised that I could lift it (all be it empty) out of it's packing box. When loaded with the lights it is still manageable, and the handles make it easy to move around and load. I decided not to fit wheels, as these would make stacking the case much harder, instead I use a trolly board if I need to move the case over long distances.
All the fittings are nicely cut into the plywood and all the rivets finished off well. I liked the way the quality ball corners will help the case stack in storage.
I have already decided to buy more of these cases to protect and transport my other sound and lighting gear.

Segnala un abuso

Trovate questa recensione sbagliata oppure per qualche motivo non utile? Scrivete gentilmente nel campo seguente il motivo della vostra scelta e se possibile inserite anche il vostro indirizzo email per eventuali domande.

Mostra traduzione

Mostra originale

Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.

Basic enough but does the job

Gerry5992 01.01.2019

First thing i would say is buy 4 castors (wheels) for this or you will die lifting it.
I have about 10 of these all at least 3 years old and all still ok.
It?s a cheap case for the money but it?s all down to how you handle it.
All of mine are still in perfect order. I use them for cans and also my arri lights fit in with a g clamp on so that?s a bonus

Segnala un abuso

Mostra traduzione

Mostra originale

Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.

A product that is great, but room for improvement.

Anonimo 14.10.2016

I have two of these cases which i use to store LED cans. In one I can fit 8x Par64 LED cans + short DMX and power cables, in the other i use it to hold 24x Cameo 7x9w Flat LED par cans + 24 wooden floor stands/bases.

A bit too bulky and heavy (once filled) to capacity (or beyond) - wish it had wheels. Case is also liable to twisting and torsion. As such bigger butterfly catches could have been fitted.

The plus side is that they have been touring now for 2+ years with no damage to the case or significant corrosion to metalwork.

The case is very spacey!

Segnala un abuso

Mostra traduzione

Mostra originale

Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.

Good quality flight case for parcan

Jinu 10.06.2015

Its a very good quality flight case for the par cans. Unfortunately its missing the wheels. With wheels its a perfect choice. Planning to buy one more for out other set of parcans.

Segnala un abuso

Leggi tutte le recensioni

Thon Case 8x LED PAR64 Short

Custom-made Case

Comprati dai clienti che hanno visto questo prodotto

120 Valutazioni dei clienti

Devi effettuare il login per poter lasciare una recensione.

43 Recensioni

Navigatore intelligente

Prodotti visti di recente

Acquisti e pagamenti sicuri

I tuoi vantaggi

Servizi

Servito con amore!

Thon Case 8x LED PAR64 Short

Custom-made Case

Comprati dai clienti che hanno visto questo prodotto

Accessori e articoli coordinati

120 Valutazioni dei clienti

Devi effettuare il login per poter lasciare una recensione.

43 Recensioni

Confronta alternative

Navigatore intelligente