Adam Hall 019740 Pre-Cut Foam

91

Pre-Cut Foam

  • Thickness: 40 mm
  • To form a desired cut-put by pressing out 15 mm polyester grid
  • Size: 142 x 33 cm
Produkt dostępny od Październik 2010
Numer artykułu 253227
Jednostka sprzedaży 1 szt.
Type Inlay
136 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Piątek, 19.04.
1

91 Oceny klientów

4.4 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

montaż

wykończenie

23 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
JT
A bit tricky to install
Josef T. 263 30.06.2014
I wanted to use this to my gig-case where the line box, strings and all other necessary stuff is kept to keep everything it it's place when moving it around. I managed to cut pieces for placing the stuff but probably i should have used a sharper knife, cause it wasn't easy to cut it so it looked good afterwards...
2
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
N
Handy
NyquistAudio 24.04.2018
Super handy, great quality pluck and go foam to fill out a case or drawer to protect your microphones. I used it in a drawer to keep our 2 x Sennheiser Handheld Transmitters and 2 x Sennheiser beltpacks with Countryman E6 protected. Couple years of use later and it's still in good condition.
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
B
Great product
Ben518 15.05.2013
A very good product, and bigger than I expected, the foam is very soft which might not be ideal in all cases.
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
A
Brilliant!
Anonimowy 07.06.2014
I was looking for a foam to protect some gear in a hard-case and the quality of this foam and the amount you get in one sheet left me with no complaints. I have since used the same foam to protect optics for my telescope and it has served me well so far.

The 'perforated' construction made the shaping process a whole lot easier than I had anticipated. I used a small scissors to create the shapes I needed, though you could just tear along the perforations without making a mess of it.

When I need more foam in future I'm not even going to shop around, I'll head straight for this product again and again.
stabilność
montaż
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie