Adam Hall DCAM 1 Camera Adapter

76

Camera Microphone Tripod Adapter

  • Thread mount: 1/4" to 5/8"
  • Rotation and inclination adjustable
  • Nickel-plated
Produkt dostępny od Sierpień 2014
Numer artykułu 344631
Jednostka sprzedaży 1 szt.
Component type Swing Adapter
Type Ball Joint
33 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Środa, 24.04.
1

76 Oceny klientów

4.4 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

40 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
R
The screw falls out
Robert269 23.08.2020
This is a nice and easy way to mount something that has a standard 1/4 inch thread to a mic stand. If you want to use your camera on a mic stand occasionally and don't care for getting a "real" tripod for example.
I use it to attach my Zoom portable recorders.

It can, of course, not take any heavy loads, but a Zoom H6 seems to work well at least.

One drawback is that the screw actually quite easily falls out of the slit since the hole is big enough for it to slide right out. Normally and this type of gear you would actually have to screw it out, but not in this case. I always have a camera quite release plate mounted to it so that the screw doesn't fall out and get lost.

So, for lighter gear, as an easy option to attach equipment with a standard 1/4" tripod mount it works well. Just don't lose the screw.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
J
Perfect for what it does...
Jon4163 19.10.2015
Great little device!

I am using this with a small camcorder attached to a microphone stand and it works perfectly for what I need.

Firstly, the relevant angle you want is set, then the ball-head adjuster locked with the plastic wing-nut (metal threaded), keeping my device firmly in place - and, as an added bonus, the upper locking screw (between camcorder and plate) has a rubber cushion to prevent any marking of the camcorder/device used keeping it very firmly in place.

All in all, a handy little device, which is very well made. I would have no hesitation in recommending this piece of equipment to anybody!
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
M
Great quality and stable
MiloSK 07.05.2021
Very good adapter for recorders like the Zoom H6 or a smaller camera. Not good for big and beefy DSLR, but good for smaller ones definitely. Great price as well!
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
J
Jzohsuh 28.11.2018
Use: mounting zoom h5 on a mic stand

It's ok, but the 1/4'' screw is slightly too long for the zoom, so i added in layers of card to allow it to tighten without breaking the zoom h5's mount.

Does the job though, is sturdy enough. I wouldn't trust it with a heavier mirrorless/DSLR camera, but would be fine for smaller gopro/point and shoots/camcorders etc.
0
0
Zgłoś nadużycie

Zgłoś nadużycie