AKG BNC Front Cable Set

27

BNC Front Cable Set

  • 1x Antenna converter cable for WMS 450 and WMS 4500
  • In combination with the supplied rack kit and the antennas of the radio system
  • Suitable for converting the antennas from the rear side of the unit to the front of the rack panel
  • Attention! 2 pieces are required for complete assembly (one cable per antenna)
Produkt dostępny od Grudzień 2004
Numer artykułu 176020
Jednostka sprzedaży 1 szt.
Application Antenna
Input connector BNC male
Output connector BNC female
Length In cm 0,50 m
Connection BNC
Cable type RG58
Length 0,5 m
Mounting kit 1
Pokaż więcej
81 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Środa, 24.04.
1

27 Oceny klientów

4.7 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

11 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
A
Perfect but expensive
Alexis 20.02.2014
I bought this AKG BNC Cable for my AKG IEM 4500 In Ear Unit. Just to add, for the WMS Instrument Series you need two of these, for the In Ear Unit just one.
The quality of the cable is pretty good.
It could be a little shorter for the IEM 4500 because you need just one as I mentioned before and the install slot of the rack-rail is directly beside the transmitter unit. 5 cm less cable and it would be perfect.
First I wanted to solder one of these cables on my own due to the price tag but i found out that all the single parts cost me nearly the same as the AKG Set so I decided to go with the AKG because the rack-rail has a special mounting that it fits perfectly and the self-wired version wouldn't.
It's still expensive for such a short cable but if you've already one of the expensive AKG Wireless Systems you could go with these cables too.

One star less for the price
2
1
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
t
Nice little bit of kit.
teehanstef 28.01.2019
I bought this so that I could put the anthenna for my in ears out the front of the case. Did exeactly what I hoped it would. very pleased.
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
A
Lead fine - device it attached to is not
Anonimowy 27.01.2015
Spare for my now defubct AKG wireless, The lead was fine but the wireless turned out to be a dud. Would not buy AKG systems again. Due to the specific nature of the lead as well, it is now gathering dust like the dire wireless that no-one could repair. So lead good but wireless system it attached to let it down.
0
4
Zgłoś nadużycie

Zgłoś nadużycie

google translate de
Wystąpił błąd. Proszę spróbować później.
A
Keine Verbindungsprobleme mehr
Anonimowy 26.08.2016
Ein AKG WMS 470 ist in unserem Rack verbaut. Natürlich kam es mit IM Rack befindlichen Antennen zu keinem störungsfreiem Empfang. Mit 2 dieser Kabel konnten nun die Antennen ans Front-Panel verlegt werden. Astreiner Empfang auch auf weiteren Strecken. So soll es sein!

Die Kabel sind Top verarbeitet, alles passt. Die Montage hat keine 5 Minuten gedauert. Das einzige Werkzeug was man braucht ist ein 16er Maulschlüssel (oder VORSICHTIG mit einer Zange).
obsługa
właściwości
dźwięk
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie