the t.bone Headphone Adapter Screw

778 Oceny klientów

4.7 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

montaż

256 Opinie

the t.bone Headphone Adapter Screw
19,40 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Piątek, 19.04.
1
google translate gb
Wystąpił błąd. Proszę spróbować później.
A
The worst adapter screw ever. Dont buy !
Andybel 02.12.2020
I bought this produkt for my AKG K240, K281 and some other AKG headphones.
All off them broke in two after taking the plug out of wallboxs and my colman monitor controller. What is Worse is that the one end gets stuck in wall box or Colman. So I had to open the device and take out the part. Luckily that was possible ! Buying several hundred products at Thomann. This is the worst quality ever. How is it possible to make it so bad?
montaż
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
L
also perfect for Sennheiser HD headphones
LutherD 12.06.2020
These adaptors are easy to misplace or lose. We all lost one at some point. Especially if you need to switch frequently between minijack and jack. I bought a couple of these for my Sennheiser HD280 and HD25. The have been working flawlessly for a couple of years no, even with heavy use. I'm a field recordist so I use these things in the field, and they get knocked about. They can handle that without any problem
montaż
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
T
passt nicht auf alle DT770 kopfhörer
Tim8386 07.05.2021
Hab den Adapter für meinen DT770 250 gekauft. Hat nur leider nicht draufgepasst. Anruf bei Thomann verschaffte Klarheit:

Dieser Adapter passt auf alle DT770er modelle vor 2019, danach gibt es ein kleineres Gewinde.

Thomann händelte es professionell und hat mir kostenfrei ein passendes Modell zugeschickt. Top!

Ich hoffe, dass die Produktbeschreibung asap geändert wird.
montaż
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
A
Hard to find, easy to loose
Anonimowy 17.03.2015
If you are a dj or a sound engineer you have lost hundreds of these throughout your life... when you are playing in clubs there is always this next (or previous DJ) that forgot about this adapter and many times forgets to give it back. These from thomann work quite well on most standard screw on headphones and are a lot cheaper than the original ones found on internet. Totally recommended and great value!
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
O
Does the job
OzanG 17.06.2019
It came as a replacement for my missing part in audio-technica ath-m50x package, free of charge. Quality feels good, packaging was really good (huge bubbly package for a very small thing in it, little bit of overkill :) ), I did not feel any difference in the quality of the sound as well. It also fits my headphones quite nice and tight. Would recommend.
montaż
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
AA
An Amazing Piece of Gear
Ahmed Aziz 06.06.2020
I can't express just how much I love this piece of equipment. The elegance of this item, combined with it's simplicity -- they conspire to make a 1/8 inch threaded connection fit a 1/4 connection. I salute you Shure HPAQA1!

Seriously though, this works perfectly with the Allen & Heath Xone headphones.
montaż
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
B
At last, spare adapters for Audio Technica headphones!
BernieW 21.04.2023
I use ATH-M50x headphones for live mixing, and M40x for tracking/monitoring for location recording. They come with 3 leads, but only one of these adapters. You have to use a threaded type or they won't correctly attach, and if you lose it (which I often do) the only way AT supplies replacements is with a whole set of 3 new leads, with only one adapter again.
I ordered this to try it out and found it was identical to the AT adapter - they probably come from the same factory. So, next time I order from Thomann I will buy at least 5 more, so every lead I have for both headphones will have an adapter at last!
montaż
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
t
Good quality
tayfunk 26.11.2019
I m using it with DT 770 Pro. Thanks Thomann
montaż
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
J
Not compatible with some beyerdynamic.
Jorge. 29.03.2021
I bought it as a replacement for some beyerdynamic, I didn't know what year my 880 PROs were from. They were not compatible with mine, but the construction is solid and looks good quality.
montaż
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
M
headphones adapter
Marco_erre 14.11.2019
bought some of those because you can't really keep track of those little gold damn thingsù so if you have a pair of akg or audiotechnica or any screwable (no pun intended) jack, get some of thos since they will only include 1 in the headphones package.
montaż
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

the t.bone Headphone Adapter Screw