Aston Microphones Shield

76

Pop Filter

  • Washable filter made of stainless steel
  • With hexagonal "Hextech" filter holes
  • Matte black rubberized gooseneck with mounting bracket
  • Printed Aston Microphones logo
Produkt dostępny od Maj 2018
Numer artykułu 431405
Jednostka sprzedaży 1 szt.
Component type Popkiller
213 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny za 3-4 tygodnie
Dostępny za 3-4 tygodnie

Produkt będzie za niedługo dostępny i natychmiastowo gotowy do wysyłk.

Informacje dotyczące wysyłki
1

76 Oceny klientów

4.6 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

47 Opinie

s
Microphon Aston filter Super !
szamotxx 14.12.2020
Super i oryginalny filter z logo Aston - niepowtarzalny. Wszystko to do własnego domowego studia nagrań doskonale się sprawdza. Zgodność produktu z opisem i dobrze zapakowany.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

H
Just great
Herbiarz 11.01.2023
Great, solid pop-filter. Hope that will last for long
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
J
Aesthetically Pleasing & Highly Functional
JChong 20.11.2020
Needed to swap out my old K&M pop filter which had the meshing tearing. I'd figured I could change out the mesh with some stocking from the dollar store but hey, it's a good opportunity to get a sturdier and nicer looking one.

Looked around for alternatives and I've always been impressed with Aston's pop filters; they look slick and are high functional. Took the dive and ordered this along with my Brauner microphone in the same order. When it came I was surprised how sturdy the gooseneck is. The only drawback was that it's really really really STIFF. A good thing though. Also I'm not a huge fan of the clamp, I would have preferred the ones with a screw which you can tighten onto the microphone stand but the clamp seems tough enough. Only time will tell if the spring loosens up or gives way. Also if the rubber bushings give way it's not going to hold anymore unless you replace it.

Tried it out, excellent pop rejection. It's almost near zero before and after and I don't notice much of a difference in the top end. Some pop filters sort of deaden the top end with too thick of a mesh, other's have very poor plosive rejection (*cough* like the K&M *cough*) but this impressed me.

If any I would have considered the shockmount with the pop filter but the Brauner mics come with their own really nice proprietary shockmount so that might be a purchase few years down the road.
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
s
Seems well made
steadyokay 01.10.2020
Sound is unique, sometimes though if your set-up isn't very good you'll notice a metallic sound to your voice. Keep in mind, this happens with basically every bad set-up though, so not necessarily the shield.

I have moved it a lot and unfortunately it's pretty loose now, as every other kinda cheap pop filter. I place it in front of the mic and as soon as I let go, it tilts further down.

There's a slight chance that due to its design I can screw it in harder or something, but it seems to be the snake is just broken.

I'd still recommend as I think it's mostly my fault and the constant moving from one studio to the other that broke it somewhat.
wykończenie
0
1
Zgłoś nadużycie

Zgłoś nadużycie

Youtube na ten temat