Audix Cab Grabber

107

Microphone Stand for Guitar Amps

  • For direct attachment to the amplifier
  • Clamping range 200 - 350 mm
  • Universally applicable with all standard microphones
Produkt dostępny od Luty 2009
Numer artykułu 208183
Jednostka sprzedaży 1 szt.
Stand type Clamp bracket
Colour Black
Foot Amp clamp
Verstelbare Hengel 0
Connection 5/8
Main tube adjustment 0
Pokaż więcej
237 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Sobota, 30.03.
1

107 Oceny klientów

4.2 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

montaż

stabilność

wykończenie

60 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
A
Anonimowy 18.08.2016
Unfortunately mine broke after only a few sessions. I used it only on two small combos in a home studio with an SM57 and a D6 bass mic (on a Line 6 Spider II guitar combo and a Hartke A25 bass combo) and I would recommend either spending more on a more substantial unit or to take great care and dismount it as soon as you have finished using it, in order to protect the mechanism and not leave it in the stretched position any longer than necessary, especially if you are using it on a larger combo or cab or are using it for stage/touring purposes. Alternatively buy a decent quality short boom mic stand if you have the space!
It's a shame because I know Audix make some great products (as mentioned I also have their D6 which is an excellent kick drum/bass amp mic that I use regularly) and of course it's possible that mine was just a below-standard example which escaped through quality control but I also have to say that Thomann's service was excellent and I have absolutely no complaints about them, just the unfortunate experience with the product.
montaż
stabilność
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
J
Best mic holder
JonnoLP 02.03.2019
After many years of carrying various mic stands around - and sometimes forgetting to take one, i came across this problem solver.

I use the Audix Cab Grabber on a Peavey Classic 30 and Yamaha DG100-212 and it fits on both perfectly. I usually have an SM57 in there but have used other mics without any issues.

Transporting the Cab Grabber is a breeze if you have an open back amp.

Everybody that has seen it has commented on what a great tool it is and I couldn't agree more.

In terms of quality, I cannot imagine it getting damaged very easily; it certainly feels very solid and well built.

Would I buy it again? I just did! 2 is better than 1.
montaż
stabilność
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
P
Audix Cab Grabber
Philip17 02.10.2013
One of the best things i've ever bought!!
No more knocking over smalls the booms you use to mic your amp. The spring is extremely strong and the gooseneck can go in any direction and also is very hard to move once tightened.
It is near impossible to knock your mic out of position.
Brilliant!
montaż
stabilność
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
k
Does what is intended to do
kos11 28.03.2021
Great product that makes your life and everyday recording workflow easier. Nicely built. Probably slightly overpriced but works as intended.
montaż
stabilność
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie