Behringer 904A VC Low Pass Filter

20

Eurorack Module

  • Analogue -24dB/oct
  • Low pass filter with resonance
  • 3 Frequency ranges switchable
  • 3 CV inputs for filter frequency
  • Current consumption: 65mA (+12V) / 50mA (-12V)
  • Width: 8 HP
  • Depth: 38 mm
Produkt dostępny od Maj 2020
Numer artykułu 490741
Jednostka sprzedaży 1 szt.
Width 8 TE / HP
422 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Środa, 24.04.
1

20 Oceny klientów

4.9 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

obsługa

właściwości

dźwięk

wykończenie

13 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
A
Awesome clone
Alvino 23.07.2020
I currently own two of these and need one or two more. The best sounding filter got even better by packaging it in a small eurorack form factor. Plenty of drive and even a little more. I love how this filter can reproduce subtle tones with the contour turned down low, or become as moogy as you like with its higher resonance settings.
Tuning the filter feedback is a bit touchy due to the small eurorack form factor with smaller knobs but it can done when needed.
Finally, I knocked off one features star, only one, because I realize that behringer is being faithful to the original 904a, but in order to connect this module to your envelope generator, you really need an attenuator to control the amount of contour... therefore you'll need an attenuator in line.
obsługa
właściwości
dźwięk
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
k
Classic filter
kurkesmurfer 19.03.2021
Does what you expect, sounds very nice. If you want to get closer to the original check out the modification proposed by Rob Keeble of AMSynth, Got one of his and that is even better. Hopefully a few more of his Schulze project Moog modules get adopted by Behringer as well.
obsługa
właściwości
dźwięk
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
k
kamielh 13.08.2020
Solid great sounding ladder filter. Very easy to overdrive. Negatives: the range switch has no real purpose, the control inputs have no attenuator, no voltage controlled resonance, no signal input attenuator. But hey its cheap and sounds really good, the sound changes radically if you change the signal input level, and always very musical. +/- 5V input is classic thick driven moog sound, lower is really clean, higher means serous squashing.
obsługa
właściwości
dźwięk
wykończenie
1
1
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
GW
Solid clone
Gunnar Waage 01.09.2021
I was not sure what to expect but this turned out to be a solid clone of the Moog 904A VC Low Pass Filter.
obsługa
właściwości
dźwięk
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

Youtube na ten temat