Behringer Eurorack Ears Model D 70HP

63

19" Rack Bracket

  • For 70 HP Behringer Eurorack cases
  • Suitable for Behringer Model D
Produkt dostępny od Styczeń 2020
Numer artykułu 477972
Jednostka sprzedaży 1 szt.
Description Rack Mount
105 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny za 3-4 tygodnie
Dostępny za 3-4 tygodnie

Produkt będzie za niedługo dostępny i natychmiastowo gotowy do wysyłk.

Informacje dotyczące wysyłki
1

63 Oceny klientów

5 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

34 Opinie

L
Ears do they job
Lunatron 05.11.2022
As in the title. No issues with installation, solid build and nice matte finish. If you need to mount your Model D into rack, I highly recommend this product.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
P
Brilliant solution at a great price.
Paul599 17.05.2020
I've been waiting for these for a while now. Basically, it turns your 70HP Behringer synth (Cat, Model D, Wasp) into a 3U rack synth. I don't know why Thomann refer these as 'Eurorack ears'.

The design is simple - remove two screws from each end cheek on the sides of your synth, add the rack ears and replace the screws. Simple. Well, until you try to mount the thing in your rack. The screw holes are oval, although on my synth there wasn't enough lateral room on the inside of the screwhole. Whether that't the rack ears or my Model D is unknown. It's not the rack though, as it happily contains lots of other 19" rack equipment without issue. I managed to get it in, but a slight adjustment of the size or location of the screwholes in the rack ears would have been nice.

There's also a fundamental design flaw with this, in that the power switch is on the back. So once it's mounted, it's impossible to get to. I leave mine on as it's powered by my power distrubition unit, but adding a front mounted switch would have been useful.

The material is hard and heavy, probably steel - they feel sturdy enough. Anyway, it serves it's purpose - but Behringer missed a trick not offering a front mounted power switch. There's loads of space for it too.
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
LC
Perfect accessory to rack your Model D
Lex C. 16.01.2022
There were many options to arranging my Model D in the studio but when space for new gear forced me to re arrange my setup, racking the Model D to my sidecar 19” rack with my hardware samplers and synths made perfect sense and these rack ears were the solution.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
B
They do their job
BattleAngel 02.08.2021
Not much can be said about rack ears. I used them in a 19" rack. No problem with screwing it with rack and with Model D. Size is matched perfectly, and it looks good in a rack. I'm happy with this purchase.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie