Celestion F12-X200

24

Loudspeaker

  • Developed for modelling amps
  • Size: 12"
  • Impedance: 8 Ohm
  • Frequency response: 60 - 20,000 Hz
  • Magnet type: Ceramic
  • Rated power: 200 W RMS
  • Sensitivity: 97 dB
  • Voice coil: 2"
  • Suitable for a cut-out diameter of 283 mm
  • Weight: 4.1 kg
Produkt dostępny od Grudzień 2018
Numer artykułu 445132
Jednostka sprzedaży 1 szt.
Impedance 8 Ohms
Load Capacity 200 W
Size of the speaker 12"
Power 200 W
Pokaż więcej
718 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny za 3-4 tygodnie
Dostępny za 3-4 tygodnie

Produkt będzie za niedługo dostępny i natychmiastowo gotowy do wysyłk.

Informacje dotyczące wysyłki
1

24 Oceny klientów

4.5 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

dźwięk

wykończenie

18 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
t
works great in a Harley Benton 1x12 cab
thrakor 19.03.2020
This is a full range speaker in the 12" guitar speaker format. So far I have replaced a Vintage 30 in my Harley Benton cabinet with this. My setup is a Line 6 helix into power amp, into this cab. I now use IRs on the helix and it sounds great - that is, it sounds similar to how it sounded before, going through studio monitors.

It comes in a sturdy double cardboard box - there's not much else to say about that. There are no accessories or anything else for this, it's just a speaker.

In terms of the sound characteristics, There's a lot of low end to my ears, however nothing that can't be EQ'd to taste, this might be inherent to this speaker or maybe my presets were bass-heavy before. So be prepared to tweak a little bit, but I think this is expected for any new setup.
dźwięk
wykończenie
9
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
F
I should not have waited
Funkaloo 28.01.2022
I’ve never been a fan of digital modeling. But I love music technology. I’ve been playing guitar for 45 years. But I struggle to get a sound out of a model or that I liked for just playing. Not in a recording context. This thing is perfect. I put it in an oversized Peavey cab It makes a huge difference. I still prefer my tube amps for playing live. But when that’s not possible or not easy this is a great option.
dźwięk
wykończenie
2
1
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
RH
Great for modellers
Rost Hariton 16.04.2021
I was looking for a speaker for modellers and plugins, this one is perfect for that. Just make sure you have a good POWER amp, so that your modeller/preamp/plugin can drive it, otherwise sound will be too quiet.
It's a great alternative to monitors or PA systems as you can fit it in a standard 1x12 guitar cabinet, or make your own cab, just like me.
dźwięk
wykończenie
2
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate de
Wystąpił błąd. Proszę spróbować później.
S
Nicht schlecht und doch nicht wirklich sinnvoll
Samfu 10.06.2020
Habe mir den F12-X200 besorgt, um auszuprobieren inwiefern ein Mittelding aus Fullrange- und Gitarrenspeaker-Sound am Axe Fx funktionieren könnte.

Eine FRFR-Box kann ja bekanntlich mit einem guten Modeller echt gut klingen und vor allem ist die Flexibilität durch den Einsatz unterschiedlicher IRs natürlich toll, das Spielgefühl hat aber nicht viel von einem Amp + Gitarrenbox.

Da ich mit FRFR vor allem im Zusammenspiel nicht so warm wurde, habe ich an meiner Matrix-Endstufe wieder eine Gitarrenbox im Einsatz. Hiermit fällt zwar die IR-Option weg, aber die Anlage klingt genau, wie ich mir das vorstelle.

Der F12-X200 verspricht ja den Spagat zwischen Fullrange-Flexibilität und Gitarrenspeaker-Spelgefühl.

Kurzum: Für mich funktioniert die Kombination aus F12-X200 und IRs nicht - klingt irgendwie leblos und "doppelt-gemoppelt", ein bisschen so wie eine IR halt üb. einen Gitarrenspeaker klingt, nicht Fullrange und schon gar nicht "..FR" Flat-Response (ist natürlich im nicht-berechneten Cabinet auch nicht möglich). Das Ansprechverhalten des Speakers ist super - natürlicher als die FRFR-Variante, also habe ich ein bisschen rumexperimentiert. Schlussendlich habe ich den Speaker eine ganze Weile in Kombination mit einem Low-Pass (Hi-Cut) bei ca. 4kHz gespielt; obenrum gestutzt kling er echt fantastisch, erinnert mich ein wenig an den G12H-75 Creamback. Fett, relativ direkt in der Ansprache, schöne Höhen und belastungsmäßig nicht aus der Reserve zu locken....

Ohne die Weiche und den Tweeter wäre der F12-X200 also ein toller Gitarrenspeaker. Die "Fullrange"-Erweiterung macht für mich absolut keinen Sinn - statt dem F12-X200 + Hicut spiele ich lieber einen normalen Gitarrenlautsprecher am Axe-FX.

Das Problem ist nicht der Speaker, sondern eher das "nicht Fisch, nicht Fleisch"-Konzept dahinter. Will ich Fullrange, nehme ich ne FRFR-Box, will ich einen Gitarrenspeaker, nehme ich einen solchen. Was also soll der F12 genau für einen Vorteil bieten? In einem wirklich gut abgestimmten Cabinet ist die IR-Verträglichkeit vielleicht besser. Wer Weiß.
dźwięk
wykończenie
6
0
Zgłoś nadużycie

Zgłoś nadużycie

Youtube na ten temat