Duesenberg Les Trem II Nickel TM85N

145

Vibrato system for guitars with Stop Tail Piece

  • Mounts to the threaded collars on the Stop Tail Piece
  • Very simple installation, no drilling or miling required, just screw tightly into the two existing threaded collars
  • New version with rounded arm for ideal handling
  • 4 Mounting screws included, 2 x metric threading, 2 x imperial threading
  • Colour: Nickel
  • Height: 4.5 mm
Produkt dostępny od Lipiec 2013
Numer artykułu 319554
Jednostka sprzedaży 1 szt.
422 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Szacowana dostawa pomiędzy Czwartek, 4.04. and Piątek, 5.04.
1

145 Oceny klientów

4.6 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

104 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
A
Absolute bargain, but get rollers for your bridge
Anonimowy 08.07.2016
This is something I had wanted for a very long time. I ordered it for my Epiphone SG, but in the end I decided to install it on my new Harley Benton SC-450Plus, as I thought a vintage-style vibrato could do better on a guitar with coil split options. I think it is a fantastic piece of engineering, as elegant as it is simple.

I am not particularly good at tinkering with guitars beyond the usual truss rod / intonation adjustments. It literally took me 10 minutes to install the whole thing, so I would say it is really easy. It is solid, looks extremely good, and you could go back to stock whenever you want.

I ended up installing rollers, though many will disagree with me. I just find that there is no loss of sustain whatsoever and that the tuning stability (which is not bad already) comes out improved by a good bit. Now, rollers cost me about 4 quid in total at my nearest guitar shop, so I guess it's not a modification that is going to break the bank.

It works very well. It is extremely smooth and has a very nice action. Clearly, it is not intended to be a Floyd Rose and it isn't very good divebomb material, but it was not designed with this in mind either. In fact, it is a vintage-style vibrato and so it should be used.

However... it goes down a good two / two and a half steps, and up about one, so you can abuse it if you really, really want to.

In conclusion, absolute bargain. If you have a LP-style guitar, you kind of need it!
wykończenie
6
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
M
Good vibrato, no drilling
Mark1967 06.01.2020
This is a great solution for adding a vibrato to a guitar without having to drill holes in it. I installed on a Gibson SG with no problem, although the pick guard partially sits underneath. To be clear, this is a vibrato system similar to a Bigsby -- don't expect to dive bomb. With that limitation in mind, you should be satisfied, as I am.
wykończenie
5
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
B
Nice, Good Quality Trem Unit.
Bob_Al 20.01.2022
I have fitted this to a Yamaha Revstar RS320, and it works well. I had to adjust by fitting an extra washer in order to centralise the up/down range to my taste, and the Duesenberg technical team were very helpful in achieving this. I intend to fit a Schaller STM Bridge to further enhance performance.
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
M
An easy solution
Motherspot 16.06.2021
This trem does'nt work good on all guitars. First i'v put it on a PRS Starla..it kept detuning. Then on a Duesenberg Starplayer Special. Worked a little better...but not totally ok and i liked this guitar better without a trem. Then i ordered a cheap roller bridge from China and installed it on the Harley Benton 'Jazzmaster'...it's very stable now, with the roller bridge...installation is 10 minutes work (including taking of the strings) It's absolutely hassle free. The quality of the tremelo is great for use on (some) stop-tail guitars. try it out!
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

Youtube na ten temat