Göldo Pickguard ST BK PG11B

66

Pickguard

  • Pickguard for ST models
  • Version without milling and knob holes
  • Single ply
  • Colour: Black
Produkt dostępny od Październik 2005
Numer artykułu 186196
Jednostka sprzedaży 1 szt.
Pickup Placement None
Colour Black
92 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Środa, 17.04.
1

66 Oceny klientów

4.6 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

25 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
p
Great for custom pickup configurations
pizza-cola 19.12.2020
I bought this for a custom strat I was building. I needed a custom pickup configuration of H+S, so I had to make my own pickguard.
This pickguard is of good quality plastic. Thickness is 2.15 mm. Top side is very glossy and comes protected with a plastic wrap. It comes with a shielding foil attached above the pot cavity area, which is nice.
I cut the holes with a hand jigsaw and filed the edges with a dremel tool. Not the most professional solution, but result was ok for my needs, and cutting was quite easy. Of course if you have access to some kind of milling machine - that would yield best results.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
TW
Good quality
Techno Witch 31.10.2019
A good quality blank pickguard, all black. Can be shaped with simple hand tools and a bit of patience. I bolted another pickguard with the correct pickup configuration on top of it to get the pickup holes in the right place. The top is very shiny. I sanded it up to 3600 grid and waxed it. Looks and feels great. I would buy this again.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
E
fine i suppose
Enjoi 29.12.2022
for the money this costs i really did expect the 8 holes to line up alot better than they did, middel left hole as looking at the pickguard and bottom right didn't line up anywhere near for both my squire or my fender.

other than this the pickguard is fine, i would like to see some chamfering/shaping of the sides but i suppose i can do this myself.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
M
St scratchplate
Malcieboy 15.09.2017
I got this to make a custom scratchplate for my guitar. Guitar has tapped single coils. So i wanted 3 mini switches and 1 vol 1 tone pot. Cutting out the material for the pickups was a pain in the arse to do and I didnt do it as good as I wanted. But that not the fault of the product. Very stiff for single ply not soft and flexible. May have to get another to do it better ! But yes very good quality.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie