Harley Benton Electric Guitar Kit Single Cut

1168

Electric Guitar Kit SC-Style

  • Complete DIY (do it yourself) kit
  • Neck attachment: Bolt-on
  • Body: Rengas (wood colour may vary)
  • Top: Arched
  • Neck: Maple
  • Fretboard: Amaranth
  • Fingerboard inlays: Trapezoid
  • Double action truss rod
  • 22 Frets
  • Scale: 628 mm
  • Nut width: 42 mm
  • Truss rod
  • Pickups: 2 Humbuckers
  • Controls: 2 Volume, 2 Tone
  • 3-Way switch
  • Hardware: Chrome
  • Die-cast machine heads
  • Strings: .010 - .046
  • Finish: Natural

Note:The body and neck have been primed with pore filler, and are therefore suitable for direct painting - for staining or other form of finish, the primer may need to be removed.

Note: a certain degree of craftsmanship is a requirement for successful assembly, as is initial experience with lacquer work.

Produkt dostępny od Sierpień 2007
Numer artykułu 115992
Jednostka sprzedaży 1 szt.
Colour Natural
Body Solid Wood
Top None
Neck Maple
Fretboard Amaranth
Frets 22
Scale 628 mm
Pickups HH
Tremolo None
Incl. Case No
Incl. Gigbag No
422 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Środa, 20.03.
1

1168 Oceny klientów

4.2 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

właściwości

dźwięk

wykończenie

832 Opinie

A
Gitara do samodzielnego montażu.
Anonimowy 19.12.2022
Za tą cenę gitara spoko, tylko trzeba mieć wiedzę o gitarach. Złożenie i regulacja gryfu, menzury i elektroniki ( bo już trochę przerobiłem, ale tylko z tego co było w zestawie) zajęło mi trzy godziny. Zanim poskładałem pomalowałem sam korpus lakierem nitro na wysoki połysk, wygląda dużo lepiej. Dźwięk i brzmienie zaskakujące nie spodziewałem się tego (polecam ekranowanie elektroniki). Ogólnie jestem zadowolony. Polecam majsterkowiczom. Szkoda że nie mogę wstawić fotek.
właściwości
dźwięk
wykończenie
3
0
Zgłoś nadużycie

Zgłoś nadużycie

ML
W tej cenie - rewelacja
Michał Lewandowski 08.03.2023
Dobrze przygotowany kit. Po zmontowaniu gitara jest gotowa do gry. Stroi i jest wygodna
właściwości
dźwięk
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

d
ok-ish
drumbly 05.08.2022
pros:
-cheap
-works and playes

cons:
-miss-aligned drilling holes
-saddle cut to high
-no instruction in the box
-finished and sealed only on the back
-scratchy frets
właściwości
dźwięk
wykończenie
0
3
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
j
Far better than I expected
jianwhite 12.04.2017
I purchased this kit, as I wanted an LP style guitar for the tone produced for recording some backing tracks, but had a limited budget. The result really surprised me. The veneer on the body is thin, so use minimum pressure when sanding. The finish is amazing. I am into natural finishes and so after a light sanding, just used thin clear varnish applied with a cloth. The result is quite stunning. A natural butterscotch with a light catching grain. It literally reflects light on stage in places.

The electrics are wrong. If left unchanged, the tone pots do not work. Five minutes with a soldering iron chnging one wire on each tone pot to the correct lug cured the problem. The cure is detailed on several reviews, so I won't bore you with repeating it hear. Once done, the volume and tone controls work very well indeed.

The back of the neck, I left as it came. The fine smooth varnish finish is perfect to play.

The only other problem was the nut. It came with the high E slot cut too near the edge. A replacement for under 2 euros cured the problem and allowed me to file it to the ideal depth.

The Frets were surpisingly good. After fitting the new nut, I set the neck to Gibson Les Paul specs and it plays perfectly. No buzz, surpringly low action. Can't ask for more.

The pickups are very acceptable, producing the rich creamy sound I was specifically after on the neck pickup, with the tone pot turned fairly down and very capable of the typical LP scream on teh bridge pick up if required. Sustain is amazing. In my opinion, a far superior performer to the Vintage/Revelation LP copies that cost 3 times the price.

The bridge is an obvious copy. Typical of a Chinese ebay replacement. I was lucky with mine, it works and I have left it on.

If I add the price of the nut and a set of D'addario 10's strings to replace the ones that came with it. I got the bargain of the century for under 100 Euros. I have played live, recorded 7 songs with this guitar and a professional performer (an ex-guitarist from Mott The Hoople) asked me if it was for sale. It isn't!

The wiring, bridge and the nut brought the quality rating down to Okay for the price. The rest is good.

So in short, if you want a good LP copy and are willing to spend 5 minutes resoldering, maybe a new nut and reasonable time setting up the neck carefully. go for it, you will not be disappointed. I reckon I would have to pay at least £500 to buy a ready made of equal playability. In fact, it has turned out to be a far superior performer to the Gibson Studio.

I have been as honest and detailed as I can. I hope this helps you.
właściwości
dźwięk
wykończenie
101
3
Zgłoś nadużycie

Zgłoś nadużycie