Jockomo Playing-Card Sticker

57

Inlay sticker for guitar

  • Removable without leaving residue
  • Suitable for electric or acoustic guitar with 24 3/4 inches (628 mm) 25 1/2 inches (648 mm) with 21, 22 or 24 frets
  • For 43 mm fretboard width
  • Super thin: 0.07 mm
  • 14 Stickers
  • Colour: White Pearl
  • Includes instructions
Produkt dostępny od Maj 2018
Numer artykułu 440434
Jednostka sprzedaży 1 szt.
Size Extra High Jumbo
Amount 14
Colour White
Motif Playing Card
Pokaż więcej
59 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Szacowana dostawa pomiędzy Środa, 24.04. and Czwartek, 25.04.
1

57 Oceny klientów

4.6 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

28 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
A
Simple method to customise the look
Anon-e-mus 13.07.2021
I've already used stickers on two other guitars and wanted a different look for an upgrade I was working on. These work best for acoustic guitars or electric guitars with dot inlays. Larger inlays won't work since the stickers are often not wide enough to cover them. Once applied, you can hardly feel them and do not affect playability at all.

The safest method is to roll the protective plastic back just far enough for the sticker you are applying. Line the sticker up into the correct position and then press down and firmly rub outwards from the middle in all directions. Then carefully pull back top plastic. As you get further down you can cut off the plastic that's already been used.
The further up the neck you go, the smaller the distance between frets so this is a little more tricky. It can mean that the smaller stickers are more difficult to remove from the backing or that the adhesive layer is less effective. I applied a tiny amount of Pritt stick to one sticker for this reason, so it was enough to hold but that were was no residue.
Although it is a little fiddly on the higher frets, it does not take long to do and the results look good and last too. I own two other guitars with stickers applied and they have lasted over a year without any wear.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
B
Great inlay stickers
BenFlitz 23.07.2018
This fit my bass perfectly, they where very easy to apply and are well made so they will not come off in a hurry. They look great!
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
D
Well done.
DarkEj 01.03.2021
Good one, but 24 fret print can be a bit better colored
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
d
High quality stickers!
dimitrisv 28.12.2018
I installed these on my cst 24t.
I cannot feel them while bending.
They are easily installed, and they don't leave markers when removed!
Very impressed
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie