K-Tek Stingray MixPro

29

Case for Sound Devices MixPre-3

  • Stable case for Sound Devices MixPre-3
  • MixPre-6 and Zoom F4 and F8
  • Removable front pocket
  • Compartments for accessories
  • Dimensions inside: 191 x 51 x 127 mm
  • External dimensions: 267 x 64 x 114 mm
  • Weight: 0.6 kg
  • Incl. shoulder strap and transparent splash guard
Produkt dostępny od Grudzień 2017
Numer artykułu 426607
Jednostka sprzedaży 1 szt.
1 290 zł
darmowa wysyłka, zawiera podatek VAT.
Dostępny za 2-3 tygodnie
Dostępny za 2-3 tygodnie

Produkt będzie za niedługo dostępny i natychmiastowo gotowy do wysyłk.

Informacje dotyczące wysyłki
1

29 Oceny klientów

4.6 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

montaż

komfort noszenia

wykończenie

18 Opinie

z
Great bag for SoundDevices MixPre 6-ii
zabobon 11.08.2023
Recorder fits very well, can be fastened by dedicated stripes. Some space left for power bank for example. Additional pocket can be detached easily which makes bag more thin. One thing that could be better is open part at the bottom, it could have some removable cover.
montaż
wykończenie
komfort noszenia
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
M
High quality product but don't buy this if you power your mixpre with a L series battery!
MatteoN 27.04.2021
This bag is sturdy and comfortable to use because it is really light and not bulky at all!
So in my opinion no doubt it is a really good tool made with high quality materials, but I want to warn potential buyers about this:
my advice is DON'T BUY IT if you power your mixpre with a L-series type of battery!
The MX-L battery sled will fit perfectly into the bag (it actually keeps the mixpre steadier) but the battery won't, because the bag's width is 51 cm only. I use a SWIT battery which is particularly big (8 cm width) but I think any other battery, even smaller, wouldn't fit inside.
The internal dimensions are indicated so, of course, this was totally my mistake because I didn't pay enough attention when I purchased it. So I ended up returning this and buying a bigger bag, no big deal but I hope this review can be helpful and prevent someone to do the same mistake
montaż
wykończenie
komfort noszenia
5
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
t
Good quality but a little too big for the MixPre-3
ttoommmmiiee 06.03.2020
Over all a good quality product however I found that it is too big for the mixpre-3 and so it is not possible to fasten it tightly in place. Simple solution is to pad it out with some foam but as it was advertised as designed for the MixPre series I was a little disappointed.
montaż
wykończenie
komfort noszenia
2
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
L
Does the job
Lils 28.04.2022
Got this and the MixPre-6 II for field recording.
It feels very robust, it has an internal rigid frame and a couple of velcro straps suspend the MixPre keeping it secure inside.

Without the front pocket attached it’s sleek enough to feel like a typical satchel bag or would even fit as a large bumbag. The strap could do with more padding.

It’s quiet enough when not being adjusted but; the zippers are smaller rounded type that can’t be opened silently, the velcro is loud with a strong grip, the material could be quieter it has that low ‘O’ (around 500Hz) rustle typical of nylon duffle bags.

All six sides can be open to access. The bottom for battery/SD access and front (for mounting camera) requires decoupling the largest area of velcro so this needs modding with tape if you’re working in quieter environments. The top has a detachable transparent piece that looks okay but the way it’s attached feels a bit of an afterthought. The back hole, for accessing tripod mount point (though I’ve my USB battery in the way there) has no cover which is a shame.

So overall could do with some improvements but I only know of two bags that fit the MixPre and this looks the better of the two.
montaż
wykończenie
komfort noszenia
0
0
Zgłoś nadużycie

Zgłoś nadużycie