K&M 166/1 Piano Tuning Hammer

26

Tuning hammer

  • K&M 166/1
  • With cylindrical square insert 6.2 mm
  • Nickel-plated
  • Weight: 0.2 kg
Produkt dostępny od Sierpień 2019
Numer artykułu 431648
Jednostka sprzedaży 1 szt.
98 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Piątek, 19.04.
1

26 Oceny klientów

4.6 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

16 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
WB
Worked well for home tuning :)
Woodwork Barn 13.10.2019
I am currently restoring a 100+ year old piano which has been VERY badly neglected and wanted to see if it was possible to tune it. Not wanting to spend a fortune on a tuning hammer for a piano which might not tune, I decided to try this one and was pleasantly surprised. The tool is of a decent quality and worked well, I was able to apply quite a hefty amount of pressure on it occasionally to free up a few seized tuners and it coped with it easily and it didn't threaten to round off the square heads as it was a really good fit.
Very happy.
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
j
Bigger and sturdier than it looks!
jojothebandit 01.11.2021
It's a great tuner, it's much bigger and heavier than it looks on the website
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
o
Works as intended, but a bit lightweight
orbatome 04.05.2020
The Tuning hammer is a little bit lightweight, but works as intended. And the shorter part of the L-shape could preferably have been a little bit longer to obtain less "interference" with the Piano body when tuning.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
JM
Good quality
Juriy Maro 14.03.2024
Perfect for my Sauter 1983
I even don’t need to lift too cover for using the key
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie