Ludwig P88AC Throw-Off

38

Snare Throw-Off with Counterpart

  • Fits all snares with earlier P83/P85/P86 throw-off
  • Wave-Lock technology for increased stability
  • Throw-off hole spacing: 6.35 cm
  • Butt plate hole spacing: 4.6 cm
Produkt dostępny od Marzec 2018
Numer artykułu 435791
Jednostka sprzedaży 1 szt.
Snare Strainer Yes
Snare Buttend Yes
277 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Krótki czas oczekiwania (zazwyczaj 2-5 dni)
Krótki czas oczekiwania (zazwyczaj 2-5 dni)

Produkt został zamówiony i ma być do nas dostarczony w przeciągu kilku dni.

Informacje dotyczące wysyłki
1

38 Oceny klientów

4.7 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

stabilność

wykończenie

27 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
r
Great quality product but be careful not to be dissapointed!
rimshot10 07.09.2018
I give 5 starts because throw-off is really good. It is made very nicely, great quality and works perfect. With P85 I had constant problem with strings loosening up during play - tension screw in P88 is "jump" regulated so it will not move anywhere.

The problem is in description of the product and I hope that also Thomann will correct it.
It says: "Ludwig P88AC Throw-Off, Throw-Off & Butt-Plate Pack, fits all snares with former P83/P85/P86 throw offs" which gives the buyer the impression that the whole pack will fit to your Ludwig snare with either mentioned throw-off on it. The true part is only about the throw-off.

My Ludwig Acrolite has a P85 throw-off and P32 butt-plate. P88 throw-off was mounted with no problems, but the butt-plate from the P88AC pack (P35) replaces only P33 butt-plate (this is actually writen on the product box!) - it has completely different hole spacing than P32.

So for this I am only able to use 50% of the prodcut (unless I will make new holes in the shell), so I am only 50% satisfied with the prodcut, but as said - this is offer description problem, not the product itself.
4
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
CT
Simple, solid, smooth.
C Train 06.06.2018
Very well constructed from cast parts. Fits perfectly as a replacement for my supraphonic's P85. Super solid with no play in the moving parts and the throw off is as smooth as silk. The snare adjustment knob is geared, much like a torque wrench so there is no chance of it loosening during playing.
The fact you also get the butt plate makes this good value for money, and the art deco look makes any drum look classy.
Only very minor criticism is that on the supraphonic I had to file the screw holes slightly to accommodate the new screws but this only took 1 minute & was easy to do.
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
@
It's just perfect.
@dima_plays_drums 03.03.2023
No fancy half done features, just solid design + nice vintage look. One of the best throw-offs on this planet! I also really dig the Wave-Lock technology.

Beware: the shipped counterpart (the butt-plate) won't fit to a Ludwig Acrolite 90's snare, unless you want to drill another hole.
stabilność
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate de
Wystąpił błąd. Proszę spróbować później.
H
Upgrade?
HOBE11 27.11.2022
Hab mir das Teil für meine Acrolite Black Galaxy mit 6,5 Tiefe bestellt, weil mir die Bänder des Teppichs beim alten Modell immer langsam rausflutschen. Das Problem ist auf der Strainerseite gelöst. Und sieht auch wirklich spitze aus.
Aber! Das Buttend passt nicht. Das war mir vorher schon klar, da ich das schon recherchieren konnte. Es ist zwar noch Platz für eine Bohrung vorgesehen, dies ist jedoch aufwendig. Mein Versuch scheiterte weil auch trotz aller Sorgfalt beim bohren und schneiden des Gewindes einfach zuwenig Materialstärke vorhanden ist.
Das zweite ist, dass , meiner Meinung nach der Strainer selbst zuwenig Spielraum in der Justierbarkeit bietet. Bei fester Spannung ist das Drehrad schwer zu greifen, da er ziemlich in der Konstuktion verschwindet.
Die Verchromung ist perfekt, auch sonst ziemlich robust. Trotzdem würde ich mir das nächste Mal auch den Strainer von INDE besorgen, das Buttend von INDE hab ich inzwischen besorgt, sieht zwar nicht so edel aus, aber durch die verstellbaren Montageschrauben easy zu montieren.
Ein Tipp an Thomann: checkt mal die Sachen von INDE aus, wäre toll wenn man die Sachen ohne den Importaufwand in Europa bekommen könnte.
stabilność
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie