VL
Not ass good as expected
The quality of the material is not something that you can rely on for live gigs or professional environment, the stability when loaded with an SPD SX doesn't feel safe and it barely does the job. Usually this does not compromise the choice of Millenium hardware as it's still good enough but as it's meant to support expensive electronic items such an SPD or similar I would go for something more reliable. So I would actually recommend to invest some more money on a more valuable piece of hardware.
1
1
Zgłoś nadużycie
S
Difficult to adjust.
I found the drum clamp to be difficult to adjust. I could never really set it level, or flat, as I wanted It to be. I wanted to create a flat "table" for a drum machine. I ended up discarding the clamp and only using the Mounting Plate, which worked fine.
3
1
Zgłoś nadużycie
P
Millenium multi-clamp
Fantastic product has worked reliably, it is stable, solid and high quality- works great on my TD30-module and rack, you can easily use on a stand too. Well worth it and cheaper than other inferior models available online. it provides a good deal of variables/angles for modules allowing sloping or straightening(levelling or slanting) of either audio interfaces, modules and even some sampling pads, or Roland Octapads. It is a good all round clamp with a very handy base plate and a geared grip joint that won't fail or slip with heavy duty weight on it-I've tested it many times and used it daily on tour without issue.
2
0
Zgłoś nadużycie
A
Does the job perfectly
I use this Multi-Clamp for my Alesis Sample Pad 4 and all I can say is that it does the job very well. I have also bought a second one for my practice kit.
PROS:
Very cheap when compared to other brands
Does the job well
Sturdy and very adjustable
Cons:
Finish is not as great as other big brands
Sometimes fly nuts are a bit stiff to tighten and loosen.
All in all this Clamp does the job very well and I would recommend it for those looking for a cheap yet effective E-Drum multi-clamp . It might not be as refined as other big brands and might also look cheap, but after all it is just a clamp and it works well.
PROS:
Very cheap when compared to other brands
Does the job well
Sturdy and very adjustable
Cons:
Finish is not as great as other big brands
Sometimes fly nuts are a bit stiff to tighten and loosen.
All in all this Clamp does the job very well and I would recommend it for those looking for a cheap yet effective E-Drum multi-clamp . It might not be as refined as other big brands and might also look cheap, but after all it is just a clamp and it works well.
2
0
Zgłoś nadużycie
mp
Durchmesser max. 25mm
Immer wieder total ärgerlich, wie wenig Gedanken sich die -vermutlich chinesischen- Konstrukteure bei der Entwicklung solcher Produkte machen. Um ein Rohr mit 25mm Durchmesser zu fassen, dürfen die Gewinde nur ca. zwei Umdrehungen greifen. Das Unterrohr meines Stativs ist mit 28mm leider schon zu groß. Wieso zum Teufel schaut man nicht einfach wie es die Japanischen Kollegen machen und gibt noch 20mm drauf... Qualität wäre absolut in Ordnung gewesen, aber so ein Schwachsinn geht gar nicht.
0
0
Zgłoś nadużycie
A
Sturdy and Strong
I initially purchased this clamp along with a Millenium cymbal stand in a bundled deal to use as an on stage stand for my Korg PadKontrol. After taking a look around and realising that brand name alternatives are rather expensive (the Roland equivalent was around £80) I decided to take my chances and go with this.
I must admit, from the outset, I have been very pleasantly surprised. The clamping mechanism on this item is very secure and robust and can be quickly adjusted if required. When in place the clamp doesn't move but there is also no stiffness when trying to adjust any of the fittings. The teeth hold together well and it looks like this will hold out for a fair number of years yet.
I must admit, from the outset, I have been very pleasantly surprised. The clamping mechanism on this item is very secure and robust and can be quickly adjusted if required. When in place the clamp doesn't move but there is also no stiffness when trying to adjust any of the fittings. The teeth hold together well and it looks like this will hold out for a fair number of years yet.
0
0
Zgłoś nadużycie
L
Great for sound module.
I use this to mount my Roland Spd-SX on my set, and it works well for that purpose, if you have an existing stand available to hook it up to.
Multi-angle clamp makes it possible to clamp it onto just about every size and angle you want.
Multi-angle clamp makes it possible to clamp it onto just about every size and angle you want.
1
0
Zgłoś nadużycie
G
Excellent value for money
This clamp works exactly as expected and is incredibly sturdy. My only negative comment would be the completely lock the base you would need to ensure the teeth of the main joint are completely lined up, meaning you are slightly limited to what angle you can completely lock the product at.
0
0
Zgłoś nadużycie
D
Perfect product!
Does what it says. Quality build!
1
0
Zgłoś nadużycie
J
Good clamp
Used to set up Alesis Sampler pad on stand. EasyPeasy , all works and is sturdy. Recommended
0
0
Zgłoś nadużycie
