Millenium Rackstand 4U

103

Rack Stand 4 U

  • Thread for M5 screws
  • Dimensions without screws (W x H x D): 515 x 225 x 358 mm
  • Colour: Black
  • Including 8 screws
Produkt dostępny od Wrzesień 2018
Numer artykułu 442734
Jednostka sprzedaży 1 szt.
usable height in U 4 U
Material Steel
Wheels No
Type Tabletop Stand
Height min. 255 mm
Height max. 255 mm
Special Design No
Weight 1,2 kg
Pokaż więcej
45 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Środa, 17.04.
1

103 Oceny klientów

3.4 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

stabilność

wykończenie

77 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
K
yeah, but no
Kristaps 28.10.2021
So it is supposed to be a 4 unit rack, but... On top there are this pole that holds it together, it is in a way of putting a 1st unit... But, i just got rid off the pole and it is holding together by the unit, so no problem there, unless you want to change units often. 2nd and 3rd unit, ok, BUT in 4th unit, that is in bottom, you can not putt anything that's deeper then few cm... So, not a full 4 unit stand, BUT, it is quite sturdy and really cheap... So basically, it is a 3 unit rack for few euros.
wykończenie
stabilność
5
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
AF
A very badly designed product
Ashain Fernando 14.11.2020
Though the item is described to be a 4U unit, the maximum number of 1U units this can hold is only 2. Though is is very sturdy, the rack is very badly designed.
wykończenie
stabilność
5
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
CM
Very poor design but usable for some things
Clavis Muziek 23.01.2023
I bought this to be able to put my 1U effects processor (Alesis Quadraverb GT) on the ground or next to me when I'm doing a show. It is impossible to insert large machine into this rack. You can only use it for small to medium sized depths. And I estimate no more than 2 or 3 units depending on the depth of your machines. Also a big negative point is the accuracy of the holes. Some of them just are little bit too narrow for the included screws. So be prepared to use a drill to adjust some of the holes a bit.
wykończenie
stabilność
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
P
Not usable
Phonocat 04.02.2020
It's absolutely not usable. It can be used only for very not deep equipment, like level meter etc. Forget hooking up anything deeper than 12cm.
wykończenie
stabilność
6
0
Zgłoś nadużycie

Zgłoś nadużycie