Millenium RW-2001

285

19" Carriage with Rollers

  • Solid 12U construction with adjustable 8U bottom
  • Load bearing capacity up to 35 kg
  • Height: 120 - 140 cm
  • Width: 65 cm
  • Depth: 60 cm
  • Weight: 7.8 kg
  • Colour: Black

Note: Delivered unassembled.

Produkt dostępny od Listopad 1999
Numer artykułu 129415
Jednostka sprzedaży 1 szt.
usable height in U 20 U
Material Steel
Wheels Yes
Type Trolley
Height min. 1200 mm
Special Design Frame Construction, Rotatable Top
Height max. 1400 mm
Weight 8,3 kg
Pokaż więcej
285 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Czwartek, 28.03.
1

285 Oceny klientów

4.1 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

stabilność

wykończenie

146 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
K
Awesome Rack
Kitapci 02.10.2014
I use this to mount a Behringer Xenyx 2442fx (located in the top adjustable angle rack) with rack gear such as headphone amplifiers, gates, reverb, ect along the bottom rack. This comes with plenty of places to mount rack equipment and is especially useful if you have a lot of them. My band uses our own small set up for band rehearsal but being the drumming it was a bit awkward having the mixer in accessible reach to change any monitor mixes on the fly, luckily with this I was able to bring the mixer and the outboard gear much closer when at the drums and push it neatly away when band practice had finished.

I can also see this being very useful in a home studio set up that lacks a patch bay as it is much easier to move this around and get to the back of equipment than in a usual cabinet of rack equipment.

However there is an issue with this style rack, since its not a cabinet all of the cabling is on show so unless you have velcro cable ties it can look a bit messy and can often run over cables on the ground when moving around if you're not looking.
Another issue isn't with the product but rather with the manufacturer; it doesn't come with any instructions which does mean you have to figure it out as you go, but even with that it only took around 5-10 minutes to build.

Over all its a great product and very good price point.
stabilność
wykończenie
3
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
DJ
Disappointing purchase
Derek J. 12.11.2013
Screw holes in the top section of the rack were unevenly placed resulting in racks that were lopsided 0mm on the left and 4mm! on the right. One of the rack spaces was unusable. Had to experiment with the placement of my various rack units (1U, 2U, 3U) to get them into the rack. Very frustrating. I understand this is a cheaply priced unit. but misaligned screw holes is totally unacceptable. Minor observation - when assembled the using didn't sit flatly on the floor - one of the wheels had to be adjusted substantially to stop the unit rocking.
stabilność
wykończenie
7
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
H
Great for the price; just update the assembly drawing!
Hogar 31.10.2017
This is a fantastic product for this price!
The only thing is that the assembly drawing is confusing, and that they packed the wrong tool (1 inbus/hex tool was wrong size). The drawing shows that all 4 wheels have brake mechanism, when in fact only 2 have those (which is OK, but it does not help assembling). Also, the drawing shows that 6 of the screws are "butterfly" type, but they are NOT provided in the package (only plain inbus/hex screws). The product photos on Thomann site are true to the package.
stabilność
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
A
Nice sturdy rack for the 'space conscious' studio
Anonimowy 18.07.2016
Having not a huge area for use of a studio, I bought one of these to get as much racked as possible but also keeping it fairly 'mobile'.

I use this with a Yamaha MG166 mixer and separate 1U headphone amp fitted to the top tiltable section and underneath a very heavy power amp, tray and rack power supply.

It is very solidly built, nice smooth and lockable wheels to move it around on.

For a small studio, this is great and I succeeded in getting a majority if not all of the mess of cables off the floor or trailing between units and now all self contained on this rack stand. Due to it being not an enclosed frame, it still allows you to swivel round and change the cables with ease.

In a way I prefer this frame to the other designs where the lower rack is front mounted, as this rack allows me to sit in front of the tilted mixer, with the lower units set back far enough not to bash your knees against.

Just 2 star lost in quality as not all of the rack hole threads are as clean and well cut as they could have been, but overall very nice rack stand.

Highly recommended
stabilność
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie