Neutrik NC3 FRX

402

Right Angle Connector

  • 3 Pole
  • XLR female
  • 5 selectable cable outlet positions
  • Version with nickel finish
Produkt dostępny od Marzec 2007
Numer artykułu 108689
Jednostka sprzedaży 1 szt.
Connector Type Female
Installation No
Gold Contacts No
Angled Yes
Plug XLR 3-pol female angled
38 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Piątek, 19.04.
1

402 Oceny klientów

4.8 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

130 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
D
Ingenious design
DrCheese 14.01.2021
An ingenious design for a right-angled XLR connector. Easy to assemble and disassemble. Once assembled it won't fall apart easily.
Easy to work with and solder.
Clever design allows you to set the rotation angle of the socket pins with respect to the rest of the connector (before soldering).
Not sure how to remove the socket pins part after it has been inserted into the housing.
Includes a little shroud to prevent the cables from short-circuiting against the metal shell of the connector. This is the part that needs special care and more care than when working with straight XLR connectors.
Usual Neutrik quality. Avoid the temptation to buy cheap XLR connectors which can be unreliable.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
G
Crazy good quality
Gtux 29.09.2020
Neutrik makes the best plugs.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
A
Good design with some issues
Anonimowy 16.05.2014
I bought several of these right angled connectors for a patch panel that is mounted on the front of a wheeled flightcase, the straight ones would stick out too far and I wanted to leave them connected when the front cover was on. They work well, a bit fiddly to solder due to the design but not too bad. One frustration is that once you have put the pin section into the metal housing, you can't get it out again - so make sure you solder them up before you do this! Also due to the design you can only set the plug up to some predefined angles - every 30 degress or so. No too much of a bit deal but worth bearing in mind if you have a specific need or limited space.
wykończenie
2
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
O
Industry standard
OriginalMarkyT 31.05.2018
It's Neutrik, it does what it should and does it very well. 5 different positions from fitting to cable are useful. We use with a Shure Beta 91a mic & can angle the cable to the side of the mic for a compact placement.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie