Neutrik NTE10-3

27

Audio Transformer 1:3 (1:10)

  • Impedance ratio: 200:1.8k (200:20k)
  • Source/Load impedance in Ohm: 200/10k, (200/50k)
  • Max. input level (@ 50 Hz, 1% THD): -7 dBu (-6 dBu)
Produkt dostępny od Kwiecień 2008
Numer artykułu 206048
Jednostka sprzedaży 1 szt.
55 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Sobota, 20.04.
1

27 Oceny klientów

4.7 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

13 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
M
Ideal for using Mics on line input
Moonmen 22.04.2023
Hello All I've bought a few of these over the years, how frustrating when your mixer has two XLR inputs and you have three mics !!! Well this transformer can be used to convert an XLR balanced mic to work on a line in. There are two ways of doing it but you have to have some electronics Knowledge. Firstly you can fit it in a small metal box, this method is great if you want to have more than one channel. The other method uses an XLR to Jack converter, I found one that you could take take to bits and fit the transformer inside but I had to remove the solid fitted jack plug and use a flying cable with a jack plug on the end. If you or a friend have some basic electronics knowledge this is fairly easy to do and the results are excellent but be warned using method two the transformer is a very tight fit !!! Good luck
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
L
Good and cheap transformer
Lauri546357 30.01.2019
Good mic step up transformer for its price
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate de
Wystąpił błąd. Proszę spróbować później.
HS
Anpassung der Impedanz alter Mikrofone
Heinrich S 25.07.2019
Jeder Mikrofonfreak kennt das Problem: Alte dynamische Mikrofone besitzen oft eine Ausgangsimpedanz von nur 50 Ohm. Und die Impedanz der klassischen englischen Bändchenmikrofone (Reslo und Co.) liegt sogar bei nur 20 Ohm. Wenn man diese Mikrofone an einen der heute üblichen Eingänge anschließt, die für 200 Ohm ausgelegt sind, ist der Pegel jämmerlich niedrig – mit entsprechenden Problemen bei der Aufnahme (oder was auch immer ich mit dem Mikrofon vorhabe…).
Hier hilft der Übertrager: Vernachlässigt man die geringen Verluste, so ändert sich bei einem Verhältnis der Windungszahlen von 1:3 die Impedanz im Verhältnis 1:9. Und schon werden aus den 20 Ohm meines Bändchenmikrofons 180 Ohm, und ich bekomme einen Pegel, mit dem sich vernünftig arbeiten lässt.
Ich habe meinen Übertrager in ein kleines Alu-Strangussgehäuse eingebaut. Der Anschluss erfolgt über zwei symmetrische Mikrofonkabel mit XLR-Steckverbindern. Damit lässt sich der Übertrager schnell und problemlos zwischen Mikrofon und Mikrofonverstärker schalten. Klangveränderungen kann ich mit meiner Technik nicht feststellen.
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate fr
Wystąpił błąd. Proszę spróbować później.
D
Indispensable pour les micros à lampes
Daver01 26.01.2024
J'ai utilisé ce transfo dans la fabrication de plusieurs microphones à condensateur à triode miniature, le résultat est édifiant !
Ni bruit de fond ,ni ronflement un son très doux et pur.
Je recommande vivement ce transfo !
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie