pro snake TPA 1003 MB

384

Professional Adaptor Cable

  • From XLR male to stereo jack female
  • Black metal connectors with gold contacts
  • Length: 0.3 m
Produkt dostępny od Kwiecień 2011
Numer artykułu 259699
Jednostka sprzedaży 1 szt.
Connector 1 XLR 3-pol male
Connector 2 Jack 6,3mm TRS female
20,90 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Piątek, 19.04.
1

384 Oceny klientów

4.6 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

81 Opinie

M
Polecam
Mikele999 04.12.2022
Przejściówka bardzo dobrze wykonana. Dużym plusem jest przewód między gniazdami, przez który użytkowanie jest o wiele wygodniejsze od standardowych złączy.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

y
yetina 23.01.2024
Does its job well and feels quite secure. Both ends hold the cables tight.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
M
Another excellent product (even if only a cable)
Martin663 18.08.2013
A brief intro to explain the reasons for purchase (and why its the same review for each item):

I currently use a rack system with items gathered over the years. To "control" this I have put together a pedal board comprising of a midi controller, 2 stereo volume pedals and an expression pedal. I purchased a number of cables from Thomann in order to connect the rack to the pedal board. These are:

Cordial CFM 6,0 VV
(Stereo cable used to connect the expression pedal from the board to the multi effects unit)

the sssnake MPP4060
(4 mono connectors to connect ach of the volume pedal outs to the mixer in the rack)

pro snake TPA 1003 MB (x4)
(Rack mixer has XLR (4) and jack (2) ins, these allow me to be flexible as to where I plug into the mixer and provide a bit of future proofing)

the sssnake SK366-6-Blk Midi
(Midi to connect the midi controller to multi effects for patch changing)

the sssnake SMP6BK
(Output from wireless receiver in rack to pedal board volume pedal)


In order to make my own multicore I used spiral wrap to keep them all together. The beauty here is that I was able to find cables of the same length as opposed to having to "adjust" one or two in order to fit. So far I've had no issue with any of the items, all are solid and well made. Have gigged a few times with my "multicore" and had no issues so far (except finding somewhere for the excess in small spaces! - my own fault). Obviously a big thing with cables is noise/signal loss etc. but I certainly haven’t noticed any detrimental effects to my sound/tone.

I've started using Thomann for most things recently and one thing I have noted is the consistent quality of the products (regardless of manufacturer) which points to the fact that they are hot on providing excellent quality gear. Long may it continue :))
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
C
Good and not good
Citizenfour 11.10.2021
They are not good at all. The inputs dont make good contact. These are the worst adapters i ever used. And this is sad because Thomann doesn't make other ones. Or maybe i have a bad batch. I must buy a few more and test them. If those are good i will change my review about these.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie