Rockbag Fingerboard Saver 2 medium

302 Oceny klientów

4.5 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

156 Opinie

Rockbag Fingerboard Saver 2 medium
16,60 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Sobota, 30.03.
1
google translate gb
Wystąpił błąd. Proszę spróbować później.
V
Usefull little thingies
V_Korneev 09.05.2018
I used similar handmade fingerboard protection pads for a simple fret leveling for a long time: they are not a panacea, but definitely can save your time and a fretboard.

These particular ones are somewhat flimsy and too ?generically-universal? to fit a guitar neck precisely, but they do their job, so if you don?t want to make such fret savers yourself, use these.

There are two of these things in a pack. Just bend one of them to a ?]-shape? to fit your guitar neck snugly, leave another flat, put some protective tape on the side metal contacts a fretboard, and you are ready to fix your frets.
wykończenie
2
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
YT
Great time saver
Yago Trillo 29.09.2020
This fingerboard saver does its job. The rubber bands are useless, you can use it without them. I've used them on several guitars and basses (Fender PBass) and even on smaller instruments (mandolins, banjos etc). If you want to do a really clean job I would still use some drafting tape on top of the fretboard to protect it from light scratches since this things are made of metal. If you wiggle it too much while using it, it can leave some light marks on the wood.

I've used these a thousand times and still will. I always useit on every string set change. It really speeds up the fret polishing moment.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
T
Works ok but may scratch the finish.
TrEr 20.10.2019
These may seem like a great idea but being made of metal with sharp edges they can actually scratch the finish if you're not careful. We're only talking about minor scratches and certainly better than driving a file into the fretboard but on some fretboard materials it may still be an issue.

The rubber bands won't last long unless you're VERY careful but it's just as effective (and actually faster) to just press it down using your hand instead.

Using this product is certainly faster than using masking tape but I'm not convinved that it's better. It's very convenient for doing some quick fretwork on my own cheaper instruments but I probably wouldn't use it for professional work.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
GN
Perfect for the job
General Ni 11.08.2017
It does very well what is supposed to do, which is to protect the fretboard, so yes it's the perfect tool for that! Also it's not too hard and thick, so it bends easy and it follows the radius of the fretboard and let you work nice with the fret. The only con that I found is that the rubber that comes with it, is pretty useless because it bends it way too much and makes it impossible to use, but it's not a big deal since you can use it without it. And of course there's two of them! I highly recommend it!
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
I
Waste of money
Interesting 06.10.2021
Use tape (something that doesn't rip paint/surface off from your bass), this is waste of money. The rubber band system really sucks, it doesn't hold the saver in place and it's difficult to set and move into next fret. Seriously, get some tape instead or just ditch the rubber band and hold the saver with your fingers.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
J
Work as described
JustRachael 28.01.2020
I'm not sure what to say about these other than they do exactly what they're supposed to do. They're well made and protect the fret board when I need to polish my feats. I appreciated the two different sizes as one set fits all my guitars.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
RS
Does the job, but not the best quality
Rogerius S 03.05.2022
It does what it promises and it's cheap and reasonably effective. It fit my stratocaster factory frets perfectly and I use them without the rubber bands. But please be careful - the edges (both outside and inside) can be sharp and not deburred so I could see a situation where one could scratch their fretboard slightly.

Other than that - it did what it was supposed to do, it's cheap, but there are better tools out there.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
M
Morga 17.06.2021
Does what is expected!
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
AB
Saves your fingerboard
A Buyer of Stuff 25.09.2023
These work well enough. I wouldn't trust the included rubber bands to hold up long. But rubber bands are replaceable. These are also perfectly usable fully hand-held.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
HP
Awesome
HB Power 22.11.2022
Very useful and durable tool
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

Rockbag Fingerboard Saver 2 medium