Rockboard Flat Patch Y Splitter Cab 30cm

126

Y-Splitter Cable

  • Length: 30 cm (11 13/16")
  • Flat Y-splitter cable with rectangular cross-section
  • For splitting TRS stereo signals into TS mono signals or as insert cable for TRS effects loops
  • Space-saving and extra narrow angled jack plugs
  • 2x Separate flexible copper conductors: 20 x 0.12 mm
  • Wrapped copper screen: 34 x 0.12 mm
  • Polyethylene signal isolation
  • PVC external insulation
  • Capacity of less than 10 pF / decimeter
  • Conductor resistance of less than 10 mOhm / Decimeter
  • 1x Angled 6.3 mm TRS jack plug
  • 2x Angled 6.3 mm TS jack plugs (gray / black)
  • Tip = Grey
  • Ring = Black
  • Working temperature: -15 ° C to + 70 ° C
  • External dimensions of cable (W x H): 4 x 3 mm (rectangular)
  • External dimensions of plug (W x H): 12.5 x 7.5 mm
  • Colour: Black
Produkt dostępny od Sierpień 2018
Numer artykułu 445215
Jednostka sprzedaży 1 szt.
Colour Black
Length 0,30 m
Connector 1 Jack 6,3mm TS male
Connector 2 Jack 6,3mm TS male
Connector from 6,3mm TS Jack
Plug out Jack 6,3mm TS male
Pokaż więcej
40 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Środa, 24.04.
1

126 Oceny klientów

4.7 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

58 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
TS
Very happy works good!
Theofanhs Siderhs 07.02.2022
from the few options on the market, Ιt helps me to leave the solid output of the iridium and to enter the input of the delay echoplex which is trs, the second one goes from the trs output of the echoplex to the 2 inputs of the prod2 DI, it works perfectly so far of course the cables are a bit thin and the only thing that helps is that there is more dancing on my pedalboard.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
J
Insert cable
JensWel 21.10.2022
Used to insert EQ into vocal processor in rack.. In this stationary environment the cable works, but it could be too flimsy for taking out and in repeated times.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
NS
Great option to split signal
Nigel ST 21.10.2021
Bought this to split the signal from my switcher going into my stereo Ernie Ball volume/pan pedal, which then is connected to two separate amps.
Only 4 star, as one of the amps is always much louder than the other and I couldn't really find the solution yet, how to solve this problem.
Maybe it's me, not the cable, but still it is annoying that one amp's sound is too tiny.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
J
Useful!
Jbite 06.12.2018
I bought to patch a stereo wireless receiver into Jack inputs on a stage rack. I needed flat patches to fit the patch under existing cabling, so very good in that respect, just be aware that 30cm is shorter than I remembered it being, shame manufacturer doesn't also offer 50 or 75cm options for those who might want to patch longer distances.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie